- ページ 17

ステレオシステム Bose Wave RadioのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose Wave Radio 20 ページ。 Owner's guide
Bose Wave Radio にも：オーナーズマニュアル (16 ページ), オーナーズマニュアル (12 ページ), クイック・セットアップ・マニュアル (1 ページ), オーナーズマニュアル (27 ページ), オーナーズマニュアル (26 ページ)

ページを印刷する

Component

Cable

Portable CD or

One miniplug-to-

tape player

stereo audio cable

CD player, tape

One stereo audio

deck, or VCR

cable

Television

TVs with stereo output

jacks need a standard

RCA cord.

TVs with single (mono)

audio output jacks use

a standard Y adapter.

TVs with earplug outlets

may need a special

earplug adapter.

Bose

Lifestyle

25 to 100 foot stereo

music system

cable with male-to-

male RCA plugs.

Powered Bose

Use the audio-input

speakers

cables that came with

your speakers.

Using other components

Choose your CD player, tape player, or other auxiliary source by pressing the AUX key. Adjust

the listening volume with the VOLUME keys. Control all other functions at the source, referring

to its owner's manual, if necessary. Control your auxiliary powered speakers from the Wave

radio. If these speakers have a volume control, you may use it.

AM189930_01_V.pdf

Connection at

component

Wave

Headphone jack (set

AUX IN jacks

the headphone volume

control to 7).

Audio output jacks

AUX IN jacks

If there are two sets of

outputs, use the fixed

outputs.

Audio output jacks

AUX IN jacks

If there are two sets of

outputs, use the fixed

outputs.

TAPE (REC) jacks

AUX IN jacks

Speaker system input

VARIABLE OUT jacks

as described in the

speaker owner's

manual.

January 4, 2002

Other Components

Note

radio

Recording from your Wave radio

is not recommended because

connections to the VARIABLE

OUT jacks shut off the radio

speakers, preventing you from

monitoring the recording volume.

To make sure the sound seems to

come from the screen, place the

Wave radio close to the TV.

To prevent interference with the TV

picture, do not place the Wave radio

directly on top of the TV.

Some Bose audio-input cables have

three connectors at each end. Use

only the two connectors that look

alike. DO NOT INSERT THE THIRD

CONNECTOR into the speaker's

SYSTEM CONTROL jack.