ページを印刷するSABER USER MANUAL
For your safety and protection, ensure correct placement and angle of ladder. See diagrams
below. Recommended ladder placement is a 4:1 ratio or approx. 70° to 75°.
NOTE: Under no circumstances should anyone be inside the roof top tent if the ladder is
not locked and secured at the correct angle.
The ladder may need to be adjusted to achieve the correct angle depending on the height of your
setup. If shortening is required, the adjustment must be done from the top.
Ensure the ladder is fully extended and all rungs are locked in place. Press the first set of locking
buttons (second rung from the top) and allow the ladder to compress until a gap of approx. 85mm
is achieved between rung 1 & 2.
Note: The ladder will only lock in the downward position.
Swing in the bottom of the ladder until it supports the weight of the roof top tent. If the angle of the
ladder is between 70° and 75°, the adjustment is complete.
If further shortening is required press the second set of locking buttons (third rung from the top).
This will close the 85mm gap until rung 1 & 2 are now touching. Swing in the bottom of the ladder
until it supports the weight of the roof top tent. If the angle of the ladder is between 70° and 75°,
this adjustment is complete.
NOTE: When height adjusted, the ladder will only lock in the downward position.
If further adjustment is required, repeat the above steps by continuing the sequence by depressing
the next set of locking buttons.
Ladder adjustment
7
TM