- ページ 14

メディア・コンバーター Bose Acoustic Wave music systemのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose Acoustic Wave music system 20 ページ。 Music system power pack
Bose Acoustic Wave music system にも：オーナーズマニュアル (30 ページ), オーナーズマニュアル (6 ページ), オーナーズマニュアル (22 ページ), オーナーズマニュアル (20 ページ), オーナーズマニュアル (13 ページ), オーナーズマニュアル (5 ページ), オーナーズマニュアル (22 ページ)

AWMDC_OG.book Page 14 Monday, May 5, 2003 11:03 AM

Using external components

Special requirement for adding a turntable

To connect a turntable, you need to ﬁrst connect a phono preampliﬁer (with RIAA equaliza-

tion) to the changer.

1. Plug one end of the stereo audio cable into the output jacks of the preampliﬁer.

2. Plug the other end of the cable into one set of AUX IN jacks on your changer, matching

red to the red jack marked R (right) and black or white to the white jack marked L (left).

3. Plug the turntable cable into the preampliﬁer.

CAUTION: Be sure to match the red plug to the red jack. This ensures proper polarity of the

signal for an accurate balance of low-to-high frequencies.

Making the power connection last

When the additional components are connected, insert the multi-disc changer power plug

into an AC power outlet.

Note: To play a component connected to the changer, you must ﬁrst turn the component on.

Neither of the Bose

settings or selections.

With the component turned on, select it using the Acoustic Wave

control. Press the AUX1 or AUX2 button on the remote, as appropriate.

This turns on the changer and the Acoustic Wave

component sound played through the system.

Pressing AUX1 or AUX2 buttons on the changer console is another means of playing an

auxiliary component connected to it.

Figure 11

Display of the Acoustic

Wave

multi-disc changer

when an auxiliary compo-

nent is selected

remote controls can turn an auxiliary component on or off, or change its

music system, so you can hear the

AUX

AUX 1

AUX 2

Play/Pause

Stop

Next Disc

multi-disc changer remote

ON/OFF

Random