- ページ 2

メディア・コンバーター Bose FreeSpace 6のPDF 技術仕様をオンラインで閲覧またはダウンロードできます。Bose FreeSpace 6 2 ページ。 Business music system
Bose FreeSpace 6 にも：インストーラーズマニュアル (16 ページ), インストーラーズマニュアル (39 ページ)

ページを印刷する

Unbalanced source A

OR, balanced source A

Auxiliary system

–

0 dB

+30 dB

POWER/AC MAINS ON

Engineers' and Architects' Specifications

The system shall be a fully integrated

business music system, designed for

permanent installation in commercial

environments. Its primary use shall be

the reproduction of high-fidelity, natural

sound, and clear paging.

The system shall be comprised of Bose

full-range flush-mount or surface-mount

loudspeakers and advanced system

electronics. Output connections shall

accommodate system expansion and a

variety of system configurations.

The electronic components shall be

housed in a metal enclosure. All set-up

controls shall be concealed from the

day-to-day user by a tamper-resistant

cover. Volume and source shall be

selected and controlled from a wired

remote control unit which can be installed

in a location convenient to the user.

The input sensitivity shall be 200mV for

music inputs and 200 V for page input.

The input impedance of the music

inputs shall be 32k

balanced and

11k

unbalanced for Channel A. The

input impedance of the music input for

Channel B shall be 10k

unbalanced.

Bose Corporation, Professional Products Division, The Mountain, Framingham, MA 01701-9168 USA

TEL (508) 879-7330 FAX (508) 872-6541

Bose products are distributed worldwide.

Product features and specifications subject to change without notice. Bose is a registered trademark of Bose Corporation.

Unbalanced source B

–

R L

PAGE

TRIGGER

LEVEL

Components connected to system electronics

The input impedance of the page input

shall be 9k

anced. The output impedance of the line

and page outputs shall be 400 .

The noise at the loudspeaker outputs

(with gain controls at maximum setting)

shall be -50dBV or 3mV maximum, the

equivalent to 30dB-SPL at 1 meter.

The loudspeakers shall have 2.5" drivers.

The bandwidth shall be 80Hz to 16kHz.

The average beamwidth over 1kHz to

4kHz shall be 150 at -6dB for the flush-

mount loudspeaker. The average beam-

width over 1kHz to 4kHz shall be 150 at

-6dB for the surface-mount loudspeaker.

The power handling of each loudspeaker

shall be 8 Watts.

The dimensions of the electronics com-

ponent shall be 4" (H) x 7.5" (W) x 15" (D)

(10.16 cm (H) x 19.05 cm (W) x 38.1 cm

(D)). It shall weigh 11.3 lb (5.14 kg).

The diameter of the front part of the

flush-mount loudspeaker shall be 6.25"

(15.9 cm); the diameter of the hole shall

be 5.75" (14.6 cm). The flush-mount

loudspeaker shall be 6.5" (16.5 cm) deep

and shall weigh 2.1 lb (.97 kg).

Bose

remote

volume control

and source

selection

Auxiliary

system(s)

Amplifier

–

REMOTE

SELECT

L + R

OFF

PAGE ENABLE

OFF

CAUTION

RISK OF ELECTRICAL

SHOCK

DO NOT OPEN

balanced and 1k unbal-

4 to 16 Bose

supplied

loudspeakers

–

-6 dB 0 dB

REMOTE

VOLUME

FreeSpace

BUSINESS MUSIC SYSTEM

WARNING

AVIS

TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK,

RISQUE DE CHOC

DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

REFER TO YOUR INSTRUCTION MANUAL FOR PROPER

ELECTRIQUE

INSTALLATION AND OPERATING PROCEDURES. INCORRECT

NE PAS OUVRIR

WIRING MAY RESULT IN DAMAGE AND/OR POOR PERFORMANCE.

The dimensions of the surface-mount

loudspeaker shall be 3.3" (H) x 7.6" (W) x

6.4" (D) (8.38 cm (H) x 19.3 cm (W) x

16.33 cm (D)). The surface-mount

loudspeaker shall weigh 2.5 lb (1.2 kg)

with mounting hardware installed.

The power requirements shall be either

120V or 220-240V at 50/60Hz.

The system shall be the Bose

FreeSpace

6 business music system.

System Configuration

Detailed installation and setup instruc-

tions for the FreeSpace 6 are provided in

the Bose

FreeSpace

6 Business Music

System Installer's Guide.

Warranty Information

The Bose

FreeSpace

music system is covered by a 5-year,

transferable limited warranty.

–

Treble

Bass

6 business