- ページ 18

ARE AND

AINTENANCE

Power saving mode

The power saving mode allows the system to consume only a minimum amount of

power. It can be used to reduce the power consumed in your home while you are away.

To switch the system to the power saving mode, press and hold the power button for 10

seconds or until the front panel indicators are off.

Note:

The Wi-Fi connection is discontinued when switching to the power saving mode.

Occasionally, software updates become available to improve the performance of your

system. The following is the preferred method for installing software updates.

Note:

For another software update method, see "Alternate update method" on page 19.

1. Make sure your SoundLink

there is an Internet connection. The front panel Wi-Fi indicator (

blue.

2. On the remote, press and hold Mute (

panel Wi-Fi indicator.

• If the Wi-Fi indicator double-blinks green twice, you can release the Mute button.

This means that the system software is up to date and the system will return to the

previous operating mode.

• If the Wi-Fi indicator starts quickly blinking green, release the Mute button:

This means that a software update is necessary and the software automatically

starts downloading. The Wi-Fi indicator continues blinking until the download is

finished. While the software update is installed, the Wi-Fi indicator glows solid

green for three seconds followed by a double blink. This pattern repeats until the

installation is finished. At the end of the installation, the system emits a tone and

automatically restarts. After restart, the system will automatically connect to your

Wi-Fi network again.

CAUTION: Do not remove power from the SoundLink Air system while updating the system

software.

Note:

If the Wi-Fi indicator starts blinking red, a system error has occurred. Contact Bose Customer

Service for assistance.

18 – English

Air system is connected to your Wi-Fi

) for five seconds while watching the front

network and that

) should be solid