- ページ 30

メディア・コンバーター Bose SoundTouch 30 series IIのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose SoundTouch 30 series II 43 ページ。 Wi-fi
Bose SoundTouch 30 series II にも: オーナーズマニュアル (18 ページ), オーナーズマニュアル (22 ページ), オーナーズマニュアル (28 ページ)

Bose SoundTouch 30 series II オーナーズマニュアル
Operating Your Lifestyle

Using the system with external components

Figure 26
Connecting headphones
®
28
®
30 System
Follow the instructions on pages 12-15 for connecting components.
Turn on your component directly or by using its remote control. Use the VOLUME
®
button on the Lifestyle
remote control or music center to raise or lower the volume. Control
all other functions at the source, referring to its owner's manual, if necessary. To begin, make
sure the component is turned on and a tape, CD, DVD, laserdisc, etc. is loaded.
®
Note: The Lifestyle
30 system cannot turn a connected component on or off.
Turning the system on and selecting the component
Press the TAPE, AUX, VIDEO 1, or VIDEO 2 button on the remote or press SOURCE SELECT
on the music center until the desired component is selected. This turns your system on and
selects the component connected to that input. If the system is already on, this button
selects the component.
Note: Selecting a source turns the system on in SURROUND (5-speaker) mode. Press
STEREO+CENTER
(3-speaker), or STEREO
STEREO+CENTER
The appropriate display indicator lights when the system is on and the component is selected.
Using a video sound source
Press VIDEO 1 or VIDEO 2 on the remote or SOURCE SELECT on the music center until
VIDEO 1 or 2 appears on the display. This turns your system on in SURROUND (5-speaker)
mode and selects the video sound source connected to the VIDEO 1 or 2 jacks.
If your video component is connected to the music center TAPE jacks, press TAPE on the
remote or SOURCE SELECT on the music center until TAPE appears on the display. This
turns your system on in SURROUND (5-speaker) mode and selects the source connected to
the TAPE jacks.
Using enhanced mode for movie soundtracks
When a movie soundtrack is played in a motion picture theater, its bass and treble are
restored to the original levels intended by the movie's sound designer. To re-create the same
performance in your home, your Lifestyle
treble to these levels when you select VIDEO 1, VIDEO 2, or AUX.
When VIDEO 1, VIDEO 2, or AUX is selected, you can also choose between standard and
enhanced modes. The system turns on in enhanced mode for movies. Press the same button
(VIDEO 1, VIDEO 2, or AUX) again to change to standard mode. When TAPE is selected, the
system turns on in standard mode. Press TAPE again to change to enhanced mode for
movies.
Note: You may not hear a difference between enhanced and standard modes when listening
to dialogue or other program material that does not have much bass or treble.
Using a tape deck
To record to a connected tape deck, play the source (AM/FM, CD, AUX, VIDEO 1 or 2) you
want to tape. In a 2-zone system, play the source in zone 1. Set the tape deck to record.
Using headphones
For headphone listening, use the stereo mini headphones jack on the side of the music center
(Figure 26). While this jack accepts most headphone models, you can get an adapter at
®
Bose
dealers and most electronics stores, if needed.
Connecting headphones silences the speakers connected to SPEAKER ZONE 1.
October 29, 2001
(2-speaker) to change the mode.
STEREO
®
30 system's enhanced mode restores the bass and
or
AM199736_06_V.pdf