- ページ 13

メディア・コンバーター Bose WAVE RADIO IIIのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose WAVE RADIO III 26 ページ。 Owner's guide
Bose WAVE RADIO III にも：オーナーズマニュアル (28 ページ), オーナーズマニュアル (28 ページ), オーナーズマニュアル (24 ページ), オーナーズマニュアル (28 ページ), サービスマニュアル (10 ページ)

ページを印刷する

Introduction

radio III has two independent alarms, Alarm

The Wave

1 and Alarm 2.

Each alarm can be set for:

• Time

• Wake-up source: buzzer or radio

• Volume

Using the Alarm buttons

Using the Alarm buttons on the bottom of the remote

you can setup and operate each alarm:

Press to turn Alarm 1 on or off.

• Press to activate the Alarm Setup

mode and view Alarm 1 settings.

• Press again to view Alarm 2 settings.

• Press again to exit the Alarm Setup

mode.

Press to turn Alarm 2 on or off.

Alarm status indicators

The upper right-hand corner of the display shows the

alarm status indicators if the alarm is set:

Alarm 1

Alarm 2

Example: Alarms 1

and 2 are set

Alarm 1 time

Alarm 2 time

ETTING AND

Setting the alarms

You can choose the settings for each alarm by activating

the Alarm Setup mode and displaying the settings for the

alarm you want to change.

To setup Alarm 1 or 2:

1. Press Alarm Setup to activate the Alarm

Setup mode and display the settings for

Alarm 1.

The alarm number and

time start flashing.

Then the display

shows you the current

settings for Alarm 1.

2. Using the Time buttons, set the

alarm time.

3. Select your wake-up source:

• BUZZER

is the factory alarm setting.

• Press

to choose a radio station.

4. Press Volume up or down to set

the volume level of the selected

wake-up source.

5. Press

to enter the Alarm 2 setup mode. Repeat

Steps 2-4 to set up Alarm 2.

6. Press

again to exit the Alarm Setup mode.

The alarm you set is turned on and the alarm time

appears on the display:

SING THE

LARMS

Flashing

Alarm number

and time

English – 13