- ページ 14
アンプ Bose FreeSpace E-4のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose FreeSpace E-4 19 ページ。 Business music system
Bose FreeSpace E-4 にも： オーナーズマニュアル (18 ページ), クイック・スタートアップ・マニュアル (4 ページ), オーナーズマニュアル (14 ページ), オーナーズマニュアル (15 ページ)
ページを印刷する
The microcontroller code residing in the E-4 system hardware
can be upgraded using the Installer™ software.
1.
Using the E-4 front panel STANDBY button, place the unit in
standby mode (the STANDBY indicator should be amber).
2.
Press the STANDBY button again to place the unit in operat-
ing mode (the SYSTEM STATUS indicator should be green).
3.
If not already done, connect your PC to the E-4 unit using a
serial data cable.
4.
Launch the Installer software. As the software activates the
connection with the E-4 unit, a status dialog window
appears. Once the connection is made, the E-4 front panel
(block diagram) appears on your screen.
5.
Click the
(Flash Configuration) button to send the con-
figuration to the E-4 hardware. This automatically updates
the design file so that it is compatible with the current soft-
ware version. When you are asked to confirm that you are
going to overwrite the E-4 hardware memory, click Yes.
6.
Click the
(Save File) button and save the design file to
your PC. This ensures that all of your settings and events will
be available later.
9.0 Upgrading E-4 Microcontroller Code
7.
Press and hold the Ctrl and Alt keys on your PC keyboard
and click the
Microcontroller Code dialog appears:
8.
Locate the appropriate microcontroller code file in the
installation directory on your computer. Typically, this file
is located in,
C:\Program Files\FreeSpace Installer 1.1\Firmware
If the OUTPUT VOLTAGE of your E-4 system is set to 70V,
select,
BoseE4Uctlr70-#.#.#.#
If the OUTPUT VOLTAGE of your E-4 system is set to 100V,
select,
BoseE4Uctlr100-#.#.#.#
(#.#.#.# represents the code version number.)
9.
When you are asked to confirm that you are about to upload
new firmware, click Yes.
71 of 76
(Flash Configuration) button. The Upload