- ページ 21

アンプ Bose Lifestyle SA-2のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose Lifestyle SA-2 32 ページ。 Bose stereo amplifier owner's guide sa-2, sa-3
Bose Lifestyle SA-2 にも：マニュアル (34 ページ), オペレーション理論 (4 ページ)

ページを印刷する

Connecting speakers to your Lifestyle

Figure 16

Connecting speaker cable

to SPEAKER OUTPUTS

Setting Up Your Lifestyle

CAUTION: DO NOT connect any make or model of powered speakers to the speaker outputs of

the Lifestyle

stereo amplifier. Doing so may cause damage to the equipment.

CAUTION: Make sure that the amplifier is disconnected from AC power before making speaker

connections.

CAUTION: The Lifestyle

stereo amplifier requires a 6-ohm minimum load.

Speaker cord consists of two insulated wires. One wire is usually marked (striped, collared, or

ribbed), indicating that it should be connected to the positive (+) terminal. The plain wire

should always be connected to the negative (–) terminal. For recommended wire sizes and

lengths, see "Wire recommendations" on page 29.

1. Remove the terminal block connector from the SPEAKER OUTPUTS jack on the rear

panel of the amplifier.

2. Connect the left speaker cord to the L positive (+) and minus (–) terminals of the 4-pin

terminal block connector.

3. Connect the right speaker cord to the R positive (+) and minus (–) terminals of the 4-pin

terminal block connector.

4. Plug the terminal block connector into the SPEAKER OUTPUTS jack.

Positive (+) wire

(marked with stripe)

stereo amplifier

Rear panel of Lifestyle

Terminal block

connector

Stereo Amplifier

stereo amplifier