- ページ 4

薪ストーブ Drolet The HunterのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Drolet The Hunter 11 ページ。 Wood heater and cook stove
Drolet The Hunter にも：オーナーズマニュアル (9 ページ)

ページを印刷する

Assembling your HUNTER :

Fig. 1

Floor Protection:

Your stove has to be placed on a non-combustible surface.

specifications must be respected:

NON-COMBUSTIBLE FLOOR PROTECTION

Thickness

1/64" (0.38 mm)

Clearances from combustible material:

Clearances from combustible material as described below must be scrupulously respected

upon installation.

CLEARANCES FROM COMBUSTIBLE MATERIAL

Back wall

48" (1220 mm)

* Height, from stove's cooking surface to ceiling.

Front

protrusion

18" (460 mm)

Side wall

48" (1220 mm)

LEGS, HEAT SHIELD and FIRE

BAFFLE

1. Turn the stove upside down;

2. Screw the four (4) legs into place (see

fig. 1);

3. Slide the heat shield between the four

(4) legs and the bottom of your stove.

4. Slide the heat baffle into place (inside

the firebox), just below the flue outlet.

Make sure that that the bumps on the

baffle are facing upward.

NOTE: You must slightly bend the sheet

metal in order to get the heat shield into

place.

The heat shield's cross must be

facing upward.

Side

protrusion

8" (200 mm)

Corners

48" (1220 mm)

The following minimum

Rear

protrusion

8" (200 mm)

Height *

60" (1524 mm)