- ページ 11

エアコン AirTek MOB-10KDCRのPDF 取扱説明書と使用方法をオンラインで閲覧またはダウンロードできます。AirTek MOB-10KDCR 20 ページ。 Mobile air conditioner

OPERATING AND FUNCTIONS

Plug the air conditioner into a suitable socket.(refer to the rating label)

The compressor is an essential element in the production of cold air. The appliance is

fitted with an overheating feature that delays start up by three minutes.

To protect the compressor from overheating or freezing, the compressor will only

operate when the room temperature is between 16°C-36° C.

Sensor button and LED indicator functions

ON/OFF Button: Press to turn the unit on or off.

Temperature up button: Press to raise the thermostat temperature setting. (only in

"COOL" or "HEAT" mode)

Temperature down button: Press to lower the thermostat temperature setting. (only

in "COOL" or "HEAT" mode)

SPEED button: Press to select either low (LO) or high (HI) fan speed.

MODE button: Press to select either "AUTO", "COOL","DRY", "FAN" or "HEAT"

(for the unit with heat function) mode. Select AUTO mode to activate the pre-set

thermostat setting. Select "COOL" or "HEAT" to set the thermostat to your preferred

temperature.

TIMER button: Press until the desired time (1 to 12 hours) appears on the LED

display. The timer can be used to switch the unit either ON or OFF when the set time

expires.

TIMER ON: Sets the timer so the unit will turn on later. Press the TIMER button

when the unit is off. Hold the TIMER button down until the desired number of hours

is displayed. The unit will turn on when the set time is reached.

TIMER OFF: Sets the timer so the unit will turn off later. Press the TIMER button

when the unit is on. Hold the TIMER button down until the desired number of hours

is reached. The unit will shut off when the set time is reached.

"ST" (Set Temperature) LED light: The light comes on when the TEMPERATURE

UP or TEMPERATURE DOWN buttons are pressed and the LED display shows the

new thermostat temperature setting.