- ページ 4
ケーブルとコネクター Drone X1 MAXのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Drone X1 MAX 6 ページ。
ページを印刷する
Dealer Activation
&
Installation
•
0
Confirm
your
Drone X1 is connected to power by verifying that the
on-board LEDs are
light
ing up. Drone
X1
modules can be connected to
power
via the following:
•
A direct connection to a compatible aftermarket re
m
ote start or
secu rity system using the included data harness.
•
A direct
connect
ion to the vehicle's OBD-11
port
utilizing the
FT-HRN-X1-OBD hardwire harness (sold separately).
Go to
myFirstech
Install at
https://install.myfirstech.com
using your
desktop, tablet, o
r
smartphone's web browser.
Note: Internet Explorer is
not
supported.
Login
to your DroneMobile Dealer Account and enter the Drone X1
device's serial number. It is the top barcode on the module sticker.
•
You cannot use your personal DroneMobile User Account to
activat
e a Drone X1.
•
If you do not have a dealer login, you can "Activate as Guest". You
will also be required to also enter the Drone X1 device's ICC ID.
Activate, test, and configure your Drone X1 system by following the
prompts on your web browser.
IMPORTANT NOTICE:
For your security, the X1MAX is equipped with a Lithium-ion Backup Battery, which
automatically activates in the event of main battery
shutoff.
If connected to the
DroneMobile app, the X1MAX will alert you when the backup battery is activated.
•
Do not attempt to disassemble, open or service the battery
pack.
•
Do not crush, puncture. or dispose of in fire or water.
•
Do not store above 140°F (60°C)
•
Do not place near sources of heat or sunlight
install.myfirstech.com
(888)820-3690