ページを印刷するLeveling
1.Take out the printer carefully and take off the plastic film.
2.Turn on the printer.
3.Please insert the build platform, fasten the rotary knob and loose the screws
(see picture
1).
(picture 1)
4.Remove the resin tank and put an A4 paper between the build platform and 4K LCD screen and
click "Move Z axis to zero"
(See picture
2). When the build platform stops please use one hand to
press it and make sure it' s in the central position then fasten it using the Allen Wrench.
(See picture 3)
（picture 2)