- ページ 7

ヒートポンプ Daikin VRV IV-S RXTQ36TAVJUのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Daikin VRV IV-S RXTQ36TAVJU 16 ページ。 Snow hood and snow visor

SINGLE/DOUBLE FAN

FRONT SNOW HOOD INSTALLATION

Front Snow Hood Assembly

1. Unscrew the four (4) screws that are holding the Plastic

grill. Remove front plastic grill (Image 1a below).

• Save the four (4) screws and Plastic grill.

(Image 1a)

2. Loosen the two (2) top screws that are holding the fan

guard to the unit. (Do not remove.)

3. Remove the two (2) bottom screws that are holding the

fan guard to the unit

•

Save the two (2) bottom screws(Image 1b).

4. Install SIDE2 to the condenser unit by placing it behind

the fan guard metal on the top and bottom. Align the

bottom screw hole with the hole in the hood side and

secure using the screw removed in step 3.

•

Push the top of SIDE2 all the way in until it stops and

tighten the top screw (Image 1c).

5. Repeat above step for SIDE1 Installation.(Image 1d)

(Image 1b)

(Image 1c)