- ページ 2

水ポンプ DROPSA 1524175 SeriesのPDF 操作およびメンテナンスマニュアルをオンラインで閲覧またはダウンロードできます。DROPSA 1524175 Series 8 ページ。 Pneumatic pumps for grease

1. INTRODUCTION

This operating and maintenance manual refers to the pumping system with part number 1524175.

The most recent version can be obtained by requesting it from the Sales Technical Office or online at

http://www.dropsa.com.

This operation and maintenance manual contains important information for the health and safety protection of the

personnel who intends to use this equipment.

This manual must be read carefully and kept so that it is always available to the operators who want to consult it.

Sturdy construction and highly reliable pump made up of a pneumatic motor and a pumping rod with steel piston. Comes

with: grease gun, follower plate and barrel cover.

They can be used in all types of industries as lubrication pumps, reservoir filling pumps and decanting pumps. They come

with hose and spray gun and are used to fill lubricators or small reservoirs.

A label is located on the pump pneumatic motor and bears the product code.

Pump code

compression ratio

noise

max grease output pressure

operating pressure

flow rate

pumping rod length

pumping rod external diameter

drums

1524344

50:1

75 dB

400 bar (5880 psi)

Min. 4 - Max. 8 bar (58 –117 psi)

700 gr./min.

480 mm (18/9 in.)

28 mm (1.1 in.)

20 kg (44 lb)