- ページ 7

水ポンプ DROPSA 1524344 SeriesのPDF 操作およびメンテナンスマニュアルをオンラインで閲覧またはダウンロードできます。DROPSA 1524344 Series 8 ページ。 Pneumatic pumps for grease

9. MAINTENANCE

The pump has been designed and built in a way to require minimum maintenance.

In order to simplify maintenance, we recommend installing it in a position that is easy to reach (see section 6.2).

Periodically check the joints of the lines for any leaks. Moreover, always keep the pump clean in order to quickly detect any

leaks.

The pump does not require special tools for any check and/or maintenance operations. We recommend using tools and

personal protection equipment (gloves) suitable for use with reference to Legislative Decree 81/08, and in good condition in

order to prevent damage to personnel or parts of the machine.

10. DISPOSAL

During maintenance on the pump, or in the event of its demolition, do not dispose of contaminated parts into the

environment. See local regulations for their correct disposal. Upon demolition of the machine, the identification label and

any other document must be destroyed.

11. ORDERING INFORMATION AND DIMENSIONS

Kit code

1524175

Kit for 20 kg. (44 lb) drum made up of: pump-drum cover-gun-1.5 m (59 in.) hose (59 in.)

Spare parts

code

1524344

50:1 ratio pneumatic pump

3132485

Dip pipe kit (figure on page 3 positions: 50 - 70)

3132486

Dip pipe kit gaskets

Motor body kit (made up of the positions: 1,2,4-11,15-22,24,26-29,31,33 of the figure on

3132487

page 4)

3132488

Motor gaskets kit (made up of the positions: 3,12,14,23,25,30,32 of the figure on page 4)

480 mm (18.9")

Gross weight of Kit 1524175: 8.2 Kg (18 lb)

12. HANDLING AND TRANSPORT

Before shipment, the pumps are carefully packed inside a cardboard box. During transport and storage, pay attention to the

direction indicated on the box.

Upon receipt, check that the packaging is not damaged and store the equipment in a dry place.

Given the low weight of the pump, handling it does not require the use of hoisting equipment.

Description

260 mm (10.2")