ページを印刷するFirst time use
IMPORTANT! during the below process DO NOT fill the kettle more than the min (0.5L) mark
on the kettle. Filling above the min. mark will cause overboiling and spillage out of the spout.
To ensure a long service-life of the water kettle, proceed as follows before using it for the first
time:
1. Fill the kettle with water and add vinegar up to Min. level mark (0.5L) on the kettle in a ratio of 1:3 (1part
vinegar / 3 parts water).
Note: we recommend preparing in the mixture in a separate container and then pouring into the kettle.
2. Bring to a boil (see Boiling water), then pour away.
3. Allow the kettle to cool down and then refill it fresh water, boil the water and then pour it away.
To avoid scale deposits, descale the water kettle at regular intervals (after about every
15th use) as described in the section "Descaling".
Boiling water
WARNING: Risk of scalding from hot water
* The kettle and its lid become hot while in use. Do not touch them.
* The lid must be tightly closed during the boiling process. It must not be opened while pouring
out water. Allow the appliance to cool down before opening the lid.
* Do not fill the water container with less than MIN. (0.5L) or more than MAX. (1.5L) of water.
1. Press the lid release trigger.
The lid opens automatically.
2. Fill the kettle with the amount of water required.
You can check the filling level on the indicator.
3. Press the front of the lid down firmly to close it.
Make sure that the lid is closed properly,
otherwise the water kettle may not switch OFF
after boiling.
Fully unwind the power cord and run it through the cable guide channel on the power base.
5. Plug the mains cable into an earthed socket that is within easy reach.
6. Place the kettle on the power base.
7. Set the On/Off switch to On (I).
The control lamp will light up to indicate that the kettle is ON，
The color of the light changes with the water
See table for details：
Water
temperature
Color of light
temperature at MAX 1.5L water
≤40℃
40-60℃
Green
Blue
60-80℃
80-90℃
Light Blue
Purple
capacity，
≥90℃
Red
Lid button
NO/OFF