- ページ 12

掃除機 anko VCB45-16AのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。anko VCB45-16A 15 ページ。

7.2 Filter maintenance

Your appliance is equipped with two filters. A motor filter (inlet filter) and an exhaust

filter. Both filters need regular maintenance as per below instructions.

Motor filter

1. Clean the motor filter (B) when changing the

dust bag. The motor filter is washable.

2. The motor filter is located in the rear section

of the dust bag compartment (Fig.6). Pull the

filter holder upwards to detach filter holder and

filter (Fig.7)

3. Push the motor filter out of the filter holder.

4. Wash the motor filter in clear warm water. Do

not add any cleaning agents as they damage

the filter.

5. After washing, dry the motor filter completely.

If necessary, let it dry in the air.

6. Insert the motor filter into the filter holder and

place the filter holder back to its original position.

Note: the filter holder can only be inserted in one

Direction.

7. Close the cover.

Exhaust filter

1. The exhaust filter (C) is located under the ventilation grille (5).

2. Push the release lever upwards to remove the ventilation grille. Refer to Fig.8

Fig.8

Fig.6

Fig.7