- ページ 10

ブレンダー anko 404201のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。anko 404201 15 ページ。 Vacuum blender

5. Do not put more than 1000ml in the blending jar when you vacuum the ingredients with

both mixed food and milk that tend to foam. Do not put more than 750ml in the jar

when using vacuum for milk or soymilk that tend to foam. If the bubbles/foam expand

beyond the Vacuum Max indicator mark, stop the vacuum process immediately.

6. For better flavor, it is recommended to vacuum first and then blend the ingredients. Or

use the "V Blend" auto program directly. Blending first and then proceeding to vacuum

does not provide the best results and may cause blockage in the vacuum system.

7. When using the min-max speed dial control switch at Min speed for blending

ingredients, the blade might get stuck if you add too much or hard food. If this happens

rotate the speed control switch clockwise to increase the blending speed from low to

high.

8. Always make sure the lid is properly closed and assembled on the jar before you switch

ON the appliance.

9. Make sure the vacuum lid is completely dry before use.

10. To ensure the quality of vacuum pumping, make sure that the pressure relief valve

(Fig.2), filter cap and one-way valve (Fig.3) are free of impurities or water before use.

11. To ensure the quality of vacuum pumping, make sure the blade assembly is tightly in

place before use.

IMPORTANT! Always turn the knob to ON and then press the desired function button for all

functions.