ページを印刷する
3.
Unscrew the filter body using two ¾ wrenches.
4.
Remove the filter body.
5.
Using a small flat head screw driver, pull the PTFE
washer (part # 198) away from body to make sure that
it seals properly when you re-install the filter.
6.
Remove the Solvent Filter Element (part # 146.1) by
unscrewing it from the body.
ANKOM Technology • 2052 O'Neil Road • Email: [email protected] • Phone: 315-986-8090 • Fax: 315-986-8091
Solvent filter cleaning
XT10/XT10I and XT15/XT15I
One to unscrew
One to hold body
XTS016
Service Procedure
JAD 1/19/2018
pg. 2 of 4