- ページ 8

水ポンプ Druck UNIK 5900のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Druck UNIK 5900 18 ページ。 Pressure sensing platform

UNIK pressure sensors are optionally available with certification permitting their use in explosive

atmospheres.

2.2 Technical Specifications

Refer to the appropriate UNIK 5*00 data sheet for technical specifications and explanation of the

product model number.

Model numbers appended with a four or eight-digit alphanumeric string denote the use of a

customer-specific specification drawing indicating the use of additions or deviations to the data

sheet specification. Refer to the specification drawing if applicable.

The sensor consists of a pressure connector, pressure measuring module, a partially

encapsulated electronics module, and electrical connection facilities, structurally combined in a

cylindrical metal housing.

The pressure connector allows the sensor to be mounted to a pressurized vessel or pipework.

The pressure measuring module consists of a welded metal body featuring a metal diaphragm

(providing a flexible barrier to the process media), a glass-to-metal seal (for electrical

connections) and a fluid filled cavity containing a silicon diaphragm with diffusion implanted

resistors arranged in the form of a Wheatstone bridge.

The operating principle of the pressure sensor is based on the piezo resistive effect: a change in

resistance when applying pressure. When pressure is applied, the silicon diaphragm flexes,

changing the resistance of the implanted resistors and the output voltage of the bridge circuit.

For sensors designed to measure 'gauge' or 'atmospheric' pressure, the rear of the silicon

diaphragm is vented to the external atmosphere via a PTFE filtered port in the body of the

enclosure, or via a tube in the supplied electrical cable.

The electronic circuit, available in three main variants ("PMP", "PDCR" and "PTX") provides a

range of electrical connection and electrical output signal options.

Depending on the type of electrical connection facility provided, the 'zero' and 'span' settings of

the sensor can be adjusted.

Depending on the type of electrical output and electrical connection of the sensor, it is possible,

by connecting certain electrical contacts together, to receive an output signal simulating an

external pressure equal to 80% of the full scale. This is the 'Shunt Calibration' feature of the

sensor.

2 | UNIK 5*00 Series–English