- ページ 6

水ポンプ Annovi Reverberi AR 185 LFPのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Annovi Reverberi AR 185 LFP 14 ページ。
Annovi Reverberi AR 185 LFP にも：取扱説明書 (20 ページ)

Installation

• The crankshaft may turn in either direction.

•

The water connection with the pump must be made using hoses of suitable diameter, in all case no less

than that of the pump fittings, securing them to the fittings using good quality clamps. The intake hose

must be coil-reinforced to prevent restrictions.

•

The pump inlet must be fitted with a filter having suitable capacity for the pump delivery rate and

must be designed to generate a vacuum of no more than - 7 Hg. This value can be measured by

connecting a vacuum gauge to the pump intake fitting.

•

The rated pressure of the outlet hose, fittings and clamps must be no less than the maximum rated

pressure of the pump. Replacing the intake and outlet fittings provided on the pump by the

manufacturer with smaller diameter alternatives may reduce the pump's performance and void the

warranty.

Mounting the pump

The pump must be installed on a horizontal surface with no flexible components between it and the mounting

surface.

The illustration shows the maximum permitted pump installation angle beyond which proper lubrication of

the crank mechanism is not ensured.

by bolting the pump base onto the machine with suitable bolts, tightening appropriately.

Fix the pump