おもちゃ Drumond Park Bubble BusterのPDF 使用方法をオンラインで閲覧またはダウンロードできます。Drumond Park Bubble Buster 2 ページ。

ページを印刷する

BATTERY INSTALLATION

Use a cross-head screwdriver to turn the battery compartment

screws anti-clockwise. Remove the battery compartment

covers.

Insert 4 AA [LR06] batteries into the bubble blower with the

polarities as shown. Insert 2 AAA [LR03] batteries into each

wand with the polarities as shown.

Replace the battery compartment covers and tighten the

screws gently.

IMPORTANT:

• Do not use rechargeable batteries

• Batteries must be removed and inserted under adult supervision

• Do not attempt to recharge non-rechargeable batteries

• Take special care to ensure batteries are inserted correctly, observing (+) and (-) marks

on battery and product

• Remove exhausted batteries from product and dispose of properly

• Do not short-circuit the supply terminals

• Do not mix old (used) and new batteries or batteries of different types, e.g. alkaline,

standard (carbon-zinc), rechargeable (e.g. NiMH), or batteries of a different make/brand

• Do not dispose of batteries in fire as they may explode or leak

The wheelie bin symbol indicates the product and batteries must not be disposed

of in domestic waste as they contain substances damaging to the environment and

health. Please use collection points or recycling facilities.

See more fun games at www.drumondpark.com

Colour and contents may vary from those shown.

Please retain this information for future reference.

Made in China.

WARNING! CHOKING HAZARD - Small parts.

Not for children under 3 years.

Ref No.

20200403a

T73117

INSTRUCTIONS

AGE 4+ For 1-2 players

CONTENTS:

2 Bubble Buster Wands, Bubble Blower, Bubble Buster liquid

TO ENJOY BUBBLE BUSTER, PLEASE

READ THESE IMPORTANT NOTES:

1. Before starting it helps to rub a little bubble liquid over the balls

at the ends of the wands' antennas so it PINGS more easily.

2. Not all burst bubbles will make a PING noise. The slower and

more deliberate the movement to prod and burst a bubble, the

more likely it will PING.

3. The very best way to make a PING is to "catch" the bubble

between the antennas, then twitch the wand to burst it.

4. If the wand makes a continuous noise, the head needs to be

wiped clean of bubble liquid. The wands may also need a few

minutes to dry thoroughly.

The contents are expressly designed for the purpose described and

shown, neither should be placed in or near water, they are electronic

and will not withstand repeated mistreatment.

WARNING: Residue from the blown bubbles can cause the surface

below the blower to become slippery.