- ページ 5

除湿機 Dry Air ATLANTIC LGRのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dry Air ATLANTIC LGR 10 ページ。 Low grain refrigerant dehumidifier

ページを印刷する

Control Panel

MAINTENANCE

Warning!

Disconnect the unit from the power

supply before cleaning or servicing.

Filter Cleaning: The pleated air filter

must be checked regularly. The filter

itself should be vacuumed frequently to

control the build-up of soil. A dirty

filter will reduce the dehumidifier's

capacity and efficiency. Do not wash

the filter. Replace the filter when it has

been used on a mold remediation job and

when it shows signs or normal wear and

tear.

Coil Cleaning: As the coils accumulate

soil, their heat transferring properties are

reduced. This can diminish water

extraction and create undue pressure on

the refrigeration system.

The coils should be cleaned about every

8 to 12 weeks. If the Atlantic LGR

Dry Air Technology • 313 North Oak Street Burlington, Washington 98233

Toll Free U.S. & Canada: 888.755.9176 • Tel: 360.755.9176 • Fax: 360.755.9236

Dehumidifier is used in a dusty

environment, cleaning may need to be

accomplished more frequently. The

coils should be dry before the following

cleaning operation is performed.

Dry Method. Inject compressed air

through each coil. After removing the

dry particle contamination, a wet

cleaning process may be used.

Caution!

Do not use a hose to flush the coils

and do not permit water to leak

into the electrical compartment.

Wet method. Use a soft brush and soapy

water. If soils have been allowed to

accumulate over time, they may be dry

and hard. Soak time may be required to

dissolve and release these soils from the

coils. A spray bottle or a syringe can be

used to apply controlled amounts of

cleaning solution. After cleaning, make

sure that the drain port, the condensate

tray and drain tubing are free of any

residual soil.

Electrical Wiring & Cord: Inspect the

power cord periodically to make sure

that the insulation is in good condition.

Replace worn or damaged cords.

Remove the dehumidifier cover to

expose the wiring and components.

Inspect wires to assure that they are

secured away from the fan blade.

Repair or replace as needed.

Fan Motor: Carefully remove dust and

debris from the fan motor and blade

assembly whenever you remove the

unit's cover for interior cleaning.

Drain Hose: Inspect the gravity drain

hose to make sure it is in good condition.

The hose should be checked before your

Atlantic LGR Dehumidifier leaves the

shop and again before the unit is left on

the job.