- ページ 8

エクステンダー Anntlent AN-L70V PlusのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Anntlent AN-L70V Plus 11 ページ。 Cell phone signal booster

that owners could be subject to potential FCC enforcement action for noncompliance.

（3）Booster Installation



Do not place the equipment in direct sunlight or in an area that has abrupt

temperature and humidity changes .



it is suggested that the booster is installed in a cool，dry and ventilated room without

erosive gas and smoke.



Connect power adaptor to the booster，connect The other end of power adaptor to

the power outlet.

WARNING:

The input voltage for the booster is 5~12V DC. DO NOT use this Booster with a regular

power supply that NOT 5~12V DC . otherwise, it will be damaged and the user may also

be injured.

TROUBLESHOOTING AND SUPPORT

Problem

LED is not light

Booster has no

effect

Booster has

effect ,but the

effect is not ideal

Resolution

1.Find an alternate power adaptor and try again.

2.Check the power outlet, the power adapter plug maybe is poor

connected.

3.If the problem is still not solved, please contact our company support

1. Check whether the direction of the booster is worng connected.

2. Make a call to your mobile phone operator to determine if the

frequency band is correct.

3. Check whether the indoor and outdoor antenna is installed correctly

4. At the location where the outdoor is installed, if your mobile phone is

able to receive a stable 3 bars cell phone signal, If not, find a location

where the mobile phone can receive a better signal to install the outdoor

antenna.

5. Whether or not your house is a metal roof. If so, you will need to set

up your outdoor antenna at least 3 meters above the roof.

Check if your outdoor signal is very weak. If you can only receive one or

two bars cell phone signal in the outdoor.

If so, contact our customer service and ask to replace the booster or

antenna with a higher gain alternative.

8 / 11