ページを印刷するMaintenance
2) AnoaEX / EX+ self-maintenance
Brake
arm
(1) How to adjust the front brake
Hold the brake wire with the long nose pliers and use a 5mm hexagon
wrench (Allen key) to unscrew the brake arm mounting bolt slightly. Lift
up the brake arm so that the brake space narrows and the brake becomes
stronger.
(2) How to adjust the rear brake
Hold the end of the wire with long nose pliers, as shown in the picture and
turn the brake adjusting nut clockwise with a wrench. Look out: If the nut
is turned too much, the brake pad may touch the tire.
24
Anoa EX / EX+ User Manual
(3) How to adjust the handlebar
Use a hexagon wrench (Allen key) to tighten or loosen the handlebar folding
mechanism, as shown in the picture.
(1)
(4) How to adjust folding lock(Fixing lever)
When the (1) 10mm tension adjusting nut is loosened, the (2)folding lock
(locking lever) of the folding part may become loose and the locking of
the lever may be released while riding. To tighten, turn the nut clockwise.
CAUTION:
*
If used in a loose state for a long time, the folding part may be
damaged. This could result in it folding while riding, which can
lead to an accident.
(2)
25
Anoa EX / EX+ User Manual