- ページ 7

照明器具 Anolis ArcSource Outdoor 24 MC Integral SmartWhiteのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Anolis ArcSource Outdoor 24 MC Integral SmartWhite 8 ページ。 Submersible
Anolis ArcSource Outdoor 24 MC Integral SmartWhite にも： ユーザーマニュアル (2 ページ), ユーザーマニュアル (4 ページ)

ページを印刷する
6. Mounting the ArcSource 24 MC Submersible into the installation
sleeve
1. Unscrew a bracket from the ArcSource 24 MC Submersible.
2. Insert the ArcSource 24 MC (4) Submersible into chassis (5) and fasten it on both sides it by means of two
bolts (7) with rubber washers (6), 6 mm long spacers ( 10) and nuts M8 (9). These parts (6,7,9,10) are
components of the installation sleeve (8).
3. Insert Allen bolts M5x45 (1) with spring washers (2) to the 30mm spacers (3) and used them to screw
the chassis (5) to the installation sleeve (8) (before inserting chassis, pull the ArcSource 24 MC
Submersible´s cable through the aperture in the installation sleeve.
4. Screw the metal collar (13) to the chassis (5) with two Allen keys M4x12 (11) and washers (12).
5. Insert the flat rubber gasket (14) into metal collar (13).
6. Put the glass (15) on the rubber gasket (14).
7. Put the shaped rubber gasket (16) on the glass (15).
8. Screw the top metal flange (17) by means of the six flat head screws M6x30 (18) to the installing sleeve.
9. Connect the ArcSource 24 MC Submersible to the ArcPower 24 MC (24V).

7. Cleaning and maintenance

Disconnect from the mains before starting any maintenance work
Rinse off loose dirt with low pressure water spray. Wash the housing with a soft brush or sponge and a mild,
non-abrasive washing detergent. Rinse it.
There are no serviceable parts inside the device.
Maintenance and service operations are only to be carried out by a qualified person.
Should you need any spare parts, please use genuine parts.
October 16, 2017
Specifications are subject to change without notice.
Made in CZECH REPUBLIC by ROBE LIGHTING s.r.o. Palackeho 416/20 CZ 75701 Valasske Mezirici
7