- ページ 7
ミュージックペダル DryBell Vibe Machine V-2のPDF オプションマニュアルをオンラインで閲覧またはダウンロードできます。DryBell Vibe Machine V-2 18 ページ。
DryBell Vibe Machine V-2 にも： ユーザーマニュアル (2 ページ)
ページを印刷する
DryBell Guitar Effects
5.6
PEDAL+ MODE
S5 mode is for use with external footswitch to turn CANCEL function ON/OFF or use tap tempo.
Turning the SPEED pot from MIN to X7 changes speed of pulsations. The whole of X7's field features the max
speed, meaning you can leave the speed pot's white tag set anywhere in that field.
If the Speed pot is set anywhere between MIN and X7 the external footswitch turns the CANCEL function ON or
OFF. When CANCEL is active the system LED flashes red, otherwise green.
If the SPEED pot is in T8, T9 or T10 position, tap tempo can be defined with external footswitch
o
T8 -> multiplier = x1, system LED flashes red in current tempo
o
T9 -> multiplier = x2, system LED flashes green in current tempo
o
T10 -> multiplier = CUSTOM (default factory multiplier value = x3), system LED flashes red in current
tempo. You can select custom multiplier in SETUP mode 7
5.7
PEDAL+ MODE
S6 mode (FAST/SLOW) is for use with an external footswitch for switching between
without Leslie ramp delay.
slower or faster.
Turning the SPEED pot from MIN to MAX changes
By pressing the external footswitch, speed changes from
Leslie ramp delay.
In
SPEED 1
speed LED is blinking GREEN, and in
If the pedal is in
without pressing the external footswitch. A new
By swivelling the speed pot the user enters the procedure for programming
5.7.1
FAST SPEED AND LESLIE RAMP DELAY SETUP PROCEDURE
1)
Swivel the speed pot to enter the FAST/SLOW programming procedure. Entering that process (after swivelling
the speed pot) is signalled with the LED blinking red and after that the LED will start to blink orange.
2)
Turn the speed pot from MIN to MAX to set your desired
footswitch) to save the
being saved, and then goes back to flashing orange.
3)
Now turn the speed pot from MIN (0 second) to MAX (10 second) to set desired Leslie ramp delay and press the
footswitch (or external footswitch) to save the Leslie ramp delay setting. The LED flashes red briefly to indicate
that the Leslie ramp delay value is being saved, and then continues to flash green in
programming procedure is finished. If the Leslie ramp delay is set to MIN (0 seconds), then PEDAL+ mode S6
works like Two speed mode, without Leslie ramp delay.
Now you can use the external footswitch to switch speed from
5.8
TAP TEMPO VIBE CYCLE SYNCHRONIZATION FEATURE
Many guitarists that use Vibe pedals can sense where the Vibe's modulation/throb starts and ends its cycle.
When you tap a desired tempo, the tap tempo functions will always synchronize the throb pulse to the right phase.
Tapping on an external footswitch (or expression pedal if used) controls the phase of throb pulse.
Tapping just twice is enough to create a tap tempo. Generally, if tapped more, the tap tempo algorithm uses an
average method of the last two tempo periods (last 3 taps). The tap tempo creating algorithm is visually indicated by the
system LED lighting orange. Shortly after the last tap the system LED goes from orange to green or red and indicates that
the tap tempo creating procedure is reset.
BACK TO CONTENTS
www.drybell.com
S5
S6
SPEED 1
and
SPEED 2
are just labels. In reality it is the user's choice which of them will be set
SPEED 2
function and the user moves the speed pot, the pedal automatically switches to
SPEED 2
value setting. The LED flashes red briefly to indicate that the SPEED 2 value is
DryBell
Vibe Machine V-2, Options User's manual, rev.1.4. 09/2018
(Table 2, Page
SPEED 1's
speed.
SPEED 1
to
SPEED 2
SPEED 2
speed LED is blinking ORANGE.
SPEED 1
can be then set.
SPEED 2
SPEED 2
value and press the footswitch (or external
SPEED 1
to
SPEED 2
10).
SPEED 1
and
SPEED
2, with or
or vice versa with programmed
SPEED 1
speed and Leslie ramp delay.
SPEED 1
mode. The
and vice versa.
Doc. No. DM0958/ Page 7