- ページ 8

計測機器 3M Static Monitor 790のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。3M Static Monitor 790 19 ページ。

3.0 Attaching the 3M

Equipment Chassis

Figure 4: Attachment of Mounting

Plate to 3M

Static Monitor 790

™

Refer to Figures 4, 5, and 6

Locate the Mounting Plate.

• Attach the Mounting Plate in the desired location using one of the following

methods:

a. Foam tape (already applied to the Mounting Plate). Clean the surface to be

mounted to with isopropyl alcohol. Remove release liner from tape before

mounting.

b. Two #8 pan head machine or wood screws (not supplied).

• Attach the Static Monitor 790 to the mounted plate as shown in Figure 4.

Align the plate with the opening on the bottom of the monitor and slide

forward onto plate until it latches.

Static Monitor 790 to a Workbench or

™

Figure 5: 3M

Static Monitor 790

™

attached to workbench

Figure 6: 3M

Static Monitor 790

™

attached to equipment chassis