- ページ 13

電動工具 Drytac HOT PRESS HGP560のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Drytac HOT PRESS HGP560 19 ページ。 Heated glass top vacuum press
Drytac HOT PRESS HGP560 にも：取扱説明書 (19 ページ)

ページを印刷する

HOT PRESS USERS MANUAL

REPARING YOUR MOUNTING SUBSTRATE

Once you have decided on the most appropriate adhesive/substrate

combination for your application, it is important that you properly

prepare your substrate before coating. Although often overlooked, this

can be the most important step when mounting a print or artwork for

display.

FOAM BOARDS

(E.G. FOME-COR®, ETC.)

The surface of these types of substrates is porous and often contains

particles that can spoil an otherwise perfect mount. Clay-coated

surfaces such as Fome-Cor®, Foam-X® and similar boards should

simply be wiped with a TacCloth™ to remove dust particles.

MAT BOARDS/MILL BOARDS

To prepare mat board or millboard for mounting, use the Anti-Static

Wisk™ brush to remove dust particles and other debris.

HARDBOARD

(E.G. MEDIUM DENSITY FIBERBOARD, MASONITE, ETC.)

To prepare hardboard substrates for mounting, wipe down the

surface with a TacCloth. Should the surface contain irregularities, use

sandpaper to remove them, then wipe the surface with a TacCloth.

Please note: Due to their highly absorbent properties, do not wipe

down the surfaces of any of these substrates (i.e. foam board, mat/

millboard or hardboard) with a moist rag.

Illustration 13A: Using TacCloth to wipe

down foam board.

Tip: It is important that you remove dust

and other debris from your prints prior to

mounting.

Mounting