計測機器 DS TT7000のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DS TT7000 8 ページ。

 Device Overview

 Unit Power-up

 Notes and Warnings

 Ports and Controls

 System Modes

 Remote Operation

 PC Applications

 SCPI Commands

 Contact Info

text

TT7000

Basic Setup and User Guide

TT7000 – Introduction to a Compact Multi-Purpose RF Instrument

The TT7000 combines a Microwave Frequency counter, Power Meter,

Signal Generator, and RF divider in one compact instrument. This

instrument can either be used as a stand-alone device, or operated from a

PC via USB. The Frequency Counter and Power meter cover the band from

100 to 7000MHz. The Signal Generator covers from 300 to 9600MHz.

The TT7000 is very simple to setup and begin to use. Stand-alone usage

only requires a standard 5 volt USB type-C cable. This can be powered

from a USB port on a PC, powered USB hub, wall charging adapter, or a

lithium-ion battery pack. No data connection is needed. Once the device is

powered, the TT7000 will display the firmware version and model number.

The TT7000 will then boot up into Meter-Counter Mode and begin

displaying the detected RF power level and the constant wave frequency.

TT7000 – RF Meter / Counter / Generator - User Guide – V3.1 - 2021