- ページ 4

セキュリティシステム AbsolutAire UC-3のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AbsolutAire UC-3 13 ページ。
AbsolutAire UC-3 にも：ユーザーマニュアル (14 ページ)

Introduction

The Smart-Vue User Interface (UI) for the UC-3 Control System displays

the information necessary to operate and diagnose the Heating and

Ventilating Unit.

This is connected to the controller via a CAT-5E cable with a maximum

length of 600 feet.

At the top left corner of the display there is a bell symbol. This is the system

alarm indicator. If an alarm is present in the unit this indicator will blink. If no

alarm is present this indicator will not be visible. At the top center of the

display is the indicator for indoor temperature. If an outdoor temperature is

being displayed the thermometer will be outside of the house. At the top

right of the display is the time in 12 hour format during normal display.

When navigating the menu, the menu title will be displayed here. Across

the center of the display is the data with the units of measure. The system

is capable of displaying up to 4 decimal places. At the bottom left is the fan

status. In the bottom center is the mode of operation and at the bottom

right is the occupancy status.

Three buttons are available for operation (see cover page). The center

button allows you to access the menu and scroll through the menu items.

The up/down buttons are used to change values.

The system has a scrolling display which displays the current Space

Temperature, as well as Building Pressure and Relative Humidity (if

equipped). The menu is separated into sub-menus for ease of use, and

only the options the unit is equipped with will be displayed. When

navigating the menu blinking items are set points that can be changed,

while non-blinking items are statuses which can be viewed only.

081721