- ページ 3

照明器具 DS Produkte BAT-M 50LEDのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DS Produkte BAT-M 50LED 6 ページ。 Led light tube

DS Produkte BAT-M 50LED 取扱説明書
EN
NOTICE – Risk of Damage to Material and Property
The article must not be electrically connected to other light
chains or similar items.
Do not switch on the article if it is still rolled up or wound up.
Before inserting the batteries, check whether the contacts on
the article and on the batteries are clean, and clean them if
necessary.
Use only the battery type specifi ed in the "Technical Data".
Always replace all batteries together. Do not use batteries of
different types or brands, or batteries with different capacities.
When replacing batteries, ensure the correct polarity (+ / –).
Remove the batteries when they are dead or if you will not be
using the article for a prolonged period. This will prevent any
damage if a battery leaks.
Remove a dead battery immediately and clean the contacts
before you insert new batteries.
The batteries must not be recharged or reactivated by other
means, dismantled, thrown into a fi re, immersed in fl uids, or
short-circuited.
The individual LEDs cannot be replaced.
Protect the article from heat, naked fl ames, extreme tempera-
tures, persistent moisture (the article is only splashproof) and
collisions.
Clean the article with a damp cloth and a little mild cleaning
agent if necessary. Do not clean it with aggressive or abrasive
cleaning agents or cloths. These could damage the surface.
Article Overview
Check the items supplied for completeness and transport dam-
age. If you fi nd any damage to the components, do not use the
article (!), but contact our customer service department.
1 Light tube with 50 LEDs
2 On / Off switch (8 light modes + OFF)
3 Battery compartment with hanging lug
Not shown:
1 x instructions
Inserting / Changing Batteries
3 x 1.5 V batteries of the AA type are also required. These
are not supplied with the article.
1. Flip open the two locking catches and open the battery com-
partment cover.
2. Take out the dead batteries if necessary and insert new bat-
teries into the holder. When inserting batteries, ensure the cor-
rect polarity (+ / –).
3. Flip the battery compartment cover shut and close the two
locking catches again. You should feel and hear them click
into place.
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
1
2
3
Customer Service / Importer:
*) Calls subject to a charge. Costs vary depending on the provider.
All rights reserved.
Putting into Operation
1. Fully unwind the article.
2. Hang up the article in a suitable location.
3. To switch on the article, press the On / Off switch. It is possi-
ble to select between 8 light modes by repeatedly pressing the
On / Off switch:
4. Store the battery compartment in a location which is protected
from sunlight and wet conditions as far as possible.
5. To switch off the article, keep pressing the On / Off switch until
the article is off.
If the article is not switched off within 6 hours or another
light mode is selected, it switches off automatically.
Cleaning and Storage
Wipe down the article using a damp, soft cloth if it is dirty.
Wind up the article when it is not in use, remove the batteries
and store everything in a dry place that is protected from sun-
light and is not accessible to children and animals.
Technical Data
Article number:
Model number:
Voltage supply:
Protection class:
Type of protection:
Disposal
Dispose of the packaging material in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the article in an environmentally friendly man-
ner at a recycling centre for used electrical and electronic
devices. It should not be disposed of in the normal house-
hold waste. More information is available from your local
authorities.
The batteries should be removed prior to disposal of the
article and disposed of separately. To protect the environ-
ment, non-rechargeable and rechargeable batteries must
not be disposed of with normal household waste, but must
be taken to suitable collection points. Note the relevant stat-
utory regulations governing the disposal of batteries!
+49 38851 314650 *)
3
Instructions
1. Combination (all functions alter-
nating)
2. In wave (LEDs light up in waves)
3. Sequential (alternately red / yel-
low – green / blue)
4. Slo glow (slowly light up alternate-
ly red / yellow – green / blue)
5. Chasing / Flashing (fl ashing alter-
nately red / yellow – green / blue)
6. Slow fade (all LEDs slowly going
on and off)
7. Twinkle / Flash (rapid fl ashing al-
ternately red / yellow – green / blue)
8. Steady on (all LEDs are lit up con-
stantly)
9. Off
04449
BAT-M 50LED
4.5 V
(3 x 1.5 V batteries, AA type)
III
IP44
Z 04449 M DS V1 0318