- ページ 3
ランタン Daintree GE Albeo AHH2のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Daintree GE Albeo AHH2 3 ページ。 Led luminaire heavy industrial high bay lighting
ページを印刷するAHH2 LED Luminaire
Albeo
®
F
Single Fixture
Secure pendant mount cover to luminaire by fully tightening the captive screws on the sides of the pendant mount box to the fixture.
NOTE: Safety chains (installer provided) can be used in mounting slots at end of fixture.
Section 3: Troubleshooting
AC power cord
AC power cord
Symptom
Solution
• Check that the color of the supply side wires match the color of the wires they are connected to.
Luminaire will not
• Check that all wire connectors are properly connected.
turn on.
• Verify that your input voltage is within specs.
• If you are using any additional controls (i.e. dimming wires, motion sensors), please also verify that those are
Section 4: Maintenance
Line
Black
Neutral
White
• Product should not be disassembled during installation process and/or while installed.
Ground
Green
0-10V(+)
Purple (+)
• Lens should be cleaned periodically for maximum lumen output.
0-10V(-)
Gray (-)
• Inspect and clear any build-up on cooling fins periodically for maximum performance.
Questions:
Web: products.gecurrent.com
Phone: 1-866-855-8629
These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in connection with installation,
operation or maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser's purposes, the
matter should be referred to GE current.
Ces instructions ne prétendent pas couvrir tous les détails ou variantes de l'équipement ni couvrir toutes les conditions possibles à satisfaire en rapport avec l'installation,
l'opération ou l'entretien. Si des informations supplémentaires sont souhaitées sur des aspects qui ne sont pas suffisamment couverts pour satisfaire les besoins du client, ou si
des problèmes particuliers se présentent, veuillez addresser ces questions à GE current.
Estas instrucciones no pretenden cubrir todos los detalles o variaciones en el equipo ni para prever cualquier contingencia que debe cumplir en relación con la instalación,
la operación o el mantenimiento. De ser deseada más información o se surgieran problemas particulares que no están cubiertos suficientemente para los propósitos del
comprador, favor de remitirse a GE current.
1/2" bolts
Captive screws
See
Note
AC power cord
AC power cord
working properly and that the unit is setup to interface with the controllers.
Neutral
Ground
0-10V(+)
0-10V(-)
To AC Main
To 0-10V
Dimmer
12"
3"
www.gecurrent.com
© 2020 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are trademarks of the
General Electric Company and are used under license. Information provided is subject to change without notice.
All values are design or typical values when measured under laboratory conditions.
ALB082 (Rev. 07/13/2020)
Dual Fixture
Tighten
Tighten
screw
screw
Line
Line
Black
Black
To AC Main
To AC Main
Neutral
White
White
Ground
Green
Green
0-10V(+)
Purple (+)
Purple (+)
To 0-10V
To 0-10V
0-10V(-)
Gray (-)
Gray (-)
Dimmer
Dimmer
Installation Guide
Captive screws
Tighten
screw
Tighten
screw
Line
Black
Neutral
White
Ground
Green
0-10V(+)
Purple (+)
0-10V(-)
Gray (-)
See
Note
To AC Main
To 0-10V
Dimmer