- ページ 2

セキュリティシステム DSC PC1550のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DSC PC1550 17 ページ。 4 digit master code
DSC PC1550 にも：取扱説明書 (17 ページ), 取扱説明書 (17 ページ), 取扱説明書 (9 ページ), 取扱説明書 (17 ページ), 取扱説明書 (12 ページ)

ページを印刷する

About Your Security System

Your security equipment has been designed to give the greatest possible

flexibility and convenience. Read this manual carefully and have your installer

instruct you on system operation and on which features have been implemented

in your system. All users of this system should be equally instructed in its use.

Fill out the System Information page and store this manual in a safe place for

future reference.

Fire Detection

This equipment is capable of monitoring fire detection devices such as smoke

detectors and providing a warning if a fire condition is detected. Good fire

detection depends on having adequate number of detectors placed in

appropriate locations. This equipment should be installed in accordance with

N.F.P.A. standard #74. (N.F.P.A., Batterymarch Park, Quincey MA 02269).

Carefully review the Family Escape Planning guidelines in this manual.

NOTE:

Your installer must enable the fire detection portion of this equipment

before it becomes functional.

Testing

To insure that your system continues to functions as intended, it is important that

you test your system weekly. See the testing procedure elsewhere in this

manual. If your system does not function properly, call your installing company

for service.

General System Operation

Your security system is made up of a PC1500 or PC1550 control panel, one or

more PC1500RK keypads and various sensors and detectors. The control

panel will be mounted out of the way in a utility closet or in a basement. The metal

cabinet contains the system electronics, fuses and stand-by battery. There is

normally no reason for anyone but the installer or serviceman to have access to

the control panel. The PC1500RK keypads have an audible indicator (buzzer),

a group of zone and system status lights and command entry keys. The keypad

is used to send commands to the system and to display the current system

status. The security station(s) will be mounted in a convenient location inside

the protected premises close to the entry/exit door(s).

The security system has several zones of area protection and each of these

zones will have one or more sensors connected to it (motion detectors,

glassbreak detectors, door contacts, etc.). When a sensor is in alarm the zone

of alarm will be indicated on the PC1500RK (zone lights 1 through 6).

IMPORTANT NOTICE

A security system cannot prevent emergencies. It is only intended to

alert you and, if included, a monitoring station, of an emergency

situation. Security systems are generally very reliable but they may not

work under all conditions and they are not a substitute for prudent

security practices or life and property insurance. Your security system

should be installed and serviced by qualified security professionals who

should instruct you on the level of protection that has been provided and

on system operations.