- ページ 7

セキュリティシステム DSC PC1550のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DSC PC1550 17 ページ。 4 digit master code
DSC PC1550 にも：取扱説明書 (17 ページ), 取扱説明書 (17 ページ), 取扱説明書 (9 ページ), 取扱説明書 (17 ページ), 取扱説明書 (12 ページ)

ページを印刷する

ALARM TEST

∗

Enter [

][6][Master Code][8] for a 2-second test of the keypad lights, keypad

buzzer, battery and the bell/siren.

Press [#] to return to Ready.

PROGRAMMING SECURITY CODES

The Master Code

∗

Enter [

][5][current Master Code][1][new Master Code]

Press [#] to return to Ready.

Record your new Master Code on the System Information page in this booklet.

Additional Codes

Up to 5 additional access codes (2 through 6) may be programmed. The 6th

access code may be established by your installer as a One-Time use code.

To program a new code:

∗

Enter [

][5][Master Code][code number][new 4 digit code]

The [code number] is a single digit either 2, 3, 4, 5 or 6.

Press [#] to return to Ready.

If an access code already exists, it will be replaced by the new code.

Record your new code(s) on the System Information page in this book.

To remove a code:

∗

Enter [

][5][Master Code][code number][

The [code number] is a single digit either 2, 3, 4, 5 or 6.

Press [#] to return to Ready.

Do not erase the Master Code (code number 1).

NOTE: It is recommended that the factory default Master Code [1234] not

be used.

ONE-TIME USE CODE

The One-Time Use code is designed for entry and exit of the premises for one

occasion only. The panel must be programmed by the installer for this option to

be enabled. The 6th access code is the One-Time code.

To use this code, enter your One-Time code as the 6th access code using the

previously described commands. When you leave the premises, arm your

system with any access code except the newly entered One-Time Use code.

This one-time code is given to a person (e.g. a maid) who will enter the premises

while the system is armed and you are away.

The One-Time code user enters the premises and disarms the system using the

one-time access code. Upon leaving, the same code is used to arm the system.

As soon as the system is armed, the one-time code is erased and can not be

used to re-enter the premises. A different code can be provided each time for

the one-time user.

∗∗∗∗

]