- ページ 10

セキュリティシステム DSC PC2525のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DSC PC2525 17 ページ。 Dsc pc2525 security system instruction manual
DSC PC2525 にも：取扱説明書 (13 ページ), 取扱説明書 (16 ページ), 取扱説明書 (13 ページ)

ページを印刷する

CHANGING SYSTEM FUNCTIONS

Changing Access Codes

The PC2525 features 8 programmable Access Codes. The first code is the Master Code, and the

remaining codes are normal Access Codes.

Programming Access Codes:

Enter [ ][5][Master Code]; the "Program" light will FLASH. The Zone Lights will indicate which Access

Codes have been programmed, and which Access Code is presently being programmed:

When the [ ][5][Master Code] command is entered, Zone Light 1 will be ON to indicate that the Master

Code is already programmed.

Changing or Adding a Code:

To change the Master Code or Access Codes 2 through 8, enter the number of the code to be changed;

the corresponding Zone Light will begin to FLASH. For example, enter [1] to change the Master Code, or

enter [2] to change Access Code 2, and so on.

With the desired Zone Light flashing, enter a new 4-digit Access Code. Do not press [ ] or [#] when

entering the code. If an existing code is being changed, the new code will replace the old one. After the

code is entered, the keypad will beep 6 times and the Zone Light will stop flashing and remain ON.

If you want to program another code, press the number key for the code to be programmed, and enter

the new 4-digit code as described above. When all desired changes are complete, press the [#] Key to

return to "Ready".

Erasing a Code:

To erase a code, enter [ ][5][Master Code]. Enter the number of the code to be erased; the Zone Light

for the code will FLASH.

Enter [

] to erase the Access Code. When all desired changes are complete, press the [#] Key to

return to "Ready".

IMPORTANT: Do not erase the Master Code. If the Master Code is accidentally erased, contact your

installing company for assistance.

Door Chime On/Off

The Door Chime feature causes the keypad to beep whenever a zone defined as a "Chime" zone is

activated; your installer will inform you of which zones on your system will activate the Door Chime feature.

This feature is useful if the Entry-Exit door or doors are out of view, and you would like an indication of

when the door zones are opened and closed. Note that the Door Chime feature only functions when the

system is disarmed.

To turn the Door Chime feature on or off, enter [ ][4]. If the feature is being turned ON, the keypad

sounder will beep 3 times. If the feature is being turned OFF, the sounder will emit a single long tone.

Zone Light is...

OFF

ON steady

Flashing

Access Code is...

not programmed

programmed

presently being programmed