- ページ 5

ネットワーク・ハードウェア Foxconn A690GM2MAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Foxconn A690GM2MA 12 ページ。 Sata raid
Foxconn A690GM2MA にも：クイックインストール (2 ページ)

2.Installing SATA Hard Disks

Different RAID mode needs different number of the SATA hard disks.You need

two SATA hard disks to support RAID 0 and RAID1. And RAID 0+1 needs four

SATA hard disks. For JBOD, two, three or four SATA hard disks are all right .

STEP1: Install the SATA hard disks into the drive bays.

STEP2: Connect one end of the SATA data cable or the 90 to the

motherboard 's primary SATA connector.

STEP3: Connect the other end of the SATA data cable to the master SATA hard

disk.

Please connect the other SATA hard disks as STEP2 and STEP3.

Enter BIOS Setup program

.Start up the computer,then enter the BIOS setup program by pressing the

<Del>key during the POST(Power-On Self-Test).

2.Select the Integrated Peripherals item,then press<Enter>.

3.Switch the Onchip SATA Type option to [RAID].

4.Press <F10>to save the BIOS setting and exit the BIOS setup program.