- ページ 8
屋外用家具 Daisy Under Bench RollerのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Daisy Under Bench Roller 12 ページ。
ページを印刷するBest indication of the battery condition is just after an operation
(pressing a button)
Battery condition light only illuminates when:
1. PV (solar panel) available or
2. AC available or
OPERATION
3. During and immediately after operation (for approximately
60 seconds after operation ceases)
Note: if there is marginal PV available (e.g. cloud coverage) then
the battery indicator light may come up orange even though
General
battery is fully charged
Note: when motor is operating, the battery LED will show red
Forward and reverse buttons control the drive motor direction.
as it's loading the battery and drawing the power.
Remote control operation is the same operation as the buttons on
Forward and reverse buttons control the drive motor direction
the control housing. Control button and remote button will only
Remote control operation is the same operation as the buttons
operate the motor while the button is being pressed. Ensure the AC
on the control housing. Control button and remote button will
only operate the motor while the button is being pressed
charger pack is not exposed to water or weather. Plug in AC charger
Ensure the AC charger pack is not exposed to water or
into the AC Charger connection to recharge battery.
weather. Plug in AC charger into the AC Charger connection to
re charge battery
To free wheel the roller tube, disengage the motor drive by lifting the
Regularly check tension of all screws and mounting bolts
locking pin – lift up to free wheel (rocking the tube back or forward
may be required to take the weight off the pin to disengage).
To free wheel the roller tube, disengage the motor drive by lifting
the locking pin – lift up to free wheel (rocking the tube back
For best operation, the pool cover should be cut to water line or less.
or forward may be required to take the weight off the pin to
disengage)
Ensure the cover has no folds or any obstruction to catch on when
For best operation, the pool cover should be cut to water line or
rolling up.
less
Ensure the cover has no folds or any obstruction to catch on
when rolling up
Tip for larger pools: To make it easier to put the cover back onto
Tip for larger pools: to make it easier to put the cover back
the pool, disengage the drive motor then push the deploy button
onto the pool, disengage the drive motor then push the deploy
on the remote as you are pulling the cover back onto the pool
button on the remote as you are pulling the cover back onto the
from one side.
pool from one side
Indicator Lights
OPERATION
Indicator light meaning:
SOLAR LED
Connector Sockets
Green = sufficient PV power available to charge battery
Green flickering red = charging from PV (the more it's charging the
longer the red is, very slow red flick means nearly fully charged)
(Note: There is a keep alive function that will keep unit operational
even in the shade without the indicator light illuminating)
Lift Pin (pull up: disengage)
(push in: engage)
10.
Adjust the solar panel
position by placing the shado
indicator in the centre of the
solar panel, at midday adjust
the position of the solar pane
so there is minimal shade from
the indicator. This will ensure
the optimum solar panel
position for your location
11.
Plug in AC Charger to
fully charge battery before fir
operation.
Indicator Lights
Directional Control
Directional
Button
Control
Button
Connector Sockets