- ページ 9
セキュリティシステム DAITEM SH423AXのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。DAITEM SH423AX 13 ページ。 Siren external
ページを印刷する5.3 Fixing the siren in place
The siren can be fixed in two different ways:
1. • Remove the tamper mechanism washer located at
the back of the base.
• For the siren to be installed there must be a space
of 6 cm to the left of the base, 4 cm above and
18 cm below. This clearance allows for the siren to
be easily opened or locked.
• Fix the base at 3 points:
- the two fixing points (A),
- the tamper mechanism (AP).
Insert adjustable fixing washers here
6 cm
wall
Tamper mechanism hole
with washer (AP)
2. Position the siren open at an angle of 45° (A) in relation
to the base and insert the pivots on the base into the
hinges.
Detachable
tamper
mechanism
washer
4 cm
Detachable tamper
mechanism washer
18 cm
A
45°
(A) 45°
OR
• Remove the two fixing washers located at the back of
the base. Remove any extra parts from the washers.
• Remove the tamper washer located at the back of the
base.
• For the siren to be installed there must be a space
of 6 cm to the left of the base, 4 cm above and
18 cm below. This clearance allows for the siren to
be easily opened or locked.
• Fix the base at 3 points:
- the two fixing points (B),
- the tamper mechanism (AP).
Insert adjustable fixing washers here
6 cm
wall
Tamper mechanism hole with washer (AP)
3. Close the siren and lock it using the screw located
inside the product.
9
Detachable
washers
Detachable
tamper
mechanism
washer
4 cm
18 cm
Siren opening
Bottom view of siren
Siren locking
Pozidriv 2