- ページ 4

セキュリティシステム DSC PowerSeries RFK5501のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。DSC PowerSeries RFK5501 17 ページ。 Powerseries
DSC PowerSeries RFK5501 にも：取扱説明書 (20 ページ), 取付説明書 (9 ページ)

ページを印刷する

Limited Warranty

Digital Security Controls warrants that for a period of 12 months from the date of purchase, the

product shall be free of defects in materials and workmanship under normal use and that in fulfil-

ment of any breach of such warranty, Digital Security Controls shall, at its option, repair or replace

the defective equipment upon return of the equipment to its repair depot. This warranty applies

only to defects in parts and workmanship and not to damage incurred in shipping or handling, or

damage due to causes beyond the control of Digital Security Controls such as lightning, excessive

voltage, mechanical shock, water damage, or damage arising out of abuse, alteration or improper

application of the equipment.

The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and

all other warranties, whether expressed or implied and of all other obligations or liabilities on the

part of Digital Security Controls. Digital Security Controls neither assumes responsibility for, nor

authorizes any other person purporting to act on its behalf to modify or to change this warranty, nor

to assume for it any other warranty or liability concerning this product.

In no event shall Digital Security Controls be liable for any direct, indirect or consequential dam-

ages, loss of anticipated profits, loss of time or any other losses incurred by the buyer in connec-

tion with the purchase, installation or operation or failure of this product.

Warning: Digital Security Controls recommends that the entire system be completely tested on a

regular basis. However, despite frequent testing, and due to, but not limited to, criminal tampering

or electrical disruption, it is possible for this product to fail to perform as expected.

Important Information:Changes or modifications not expressly approved by Digital Security Con-

trols could void the user's authority to operate this equipment.

FCC Compliance Statement

Caution: Changes or modifications not expressly approved by Digital Security Controls could void

your authority to use this equipment.

This equipment generates and uses radio frequency energy and if not installed and used properly, in

strict accordance with the manufacturer's instructions, may cause interference to radio and television

reception. It has been type tested and found to comply with the limits for Class B device in accor-

dance with the specifications in Subpart "B" of Part 15 of FCC Rules, which are designed to provide

reasonable protection against such interference in any residential installation. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

interference to television or radio reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following mea-

sures:

• Re-orient the receiving antenna

• Relocate the alarm control with respect to the receiver

• Move the alarm control away from the receiver

• Connect the alarm control into a different outlet so that alarm control and receiver are on different

circuits.

If necessary, the user should consult the dealer or an experienced radio/television technician for addi-

tional suggestions. The user may find the following booklet prepared by the FCC helpful: "How to

Identify and Resolve Radio/Television Interference Problems". This booklet is available from the U.S.

Government Printing Office, Washington, D.C. 20402, Stock # 004-000-00345-4.

IMPORTANT - READ CAREFULLY: DSC Software purchased with or without Products and Components

is copyrighted and is purchased under the following license terms:

• This End-User License Agreement ("EULA") is a legal agreement between You (the company,

individual or entity who acquired the Software and any related Hardware) and Digital Security

Controls, a division of Tyco Safety Products Canada Ltd. ("DSC"), the manufacturer of the

integrated security systems and the developer of the software and any related products or

components ("HARDWARE") which You acquired.

• If the DSC software product ("SOFTWARE PRODUCT" or "SOFTWARE") is intended to be

accompanied by HARDWARE, and is NOT accompanied by new HARDWARE, You may not

use, copy or install the SOFTWARE PRODUCT. The SOFTWARE PRODUCT includes computer

software, and may include associated media, printed materials, and "online" or electronic

documentation.

• Any software provided along with the SOFTWARE PRODUCT that is associated with a separate

end-user license agreement is licensed to You under the terms of that license agreement.

• By installing, copying, downloading, storing, accessing or otherwise using the SOFTWARE

PRODUCT, You agree unconditionally to be bound by the terms of this EULA, even if this EULA

is deemed to be a modification of any previous arrangement or contract. If You do not agree to

the terms of this EULA, DSC is unwilling to license the SOFTWARE PRODUCT to You, and You

have no right to use it.

SOFTWARE PRODUCT LICENSE

The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as

well as other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, not

sold.

1.GRANT OF LICENSE This EULA grants You the following rights:

(a)

Software Installation and Use - For each license You acquire, You may have only one copy

of the SOFTWARE PRODUCT installed.

(b)

Storage/Network Use - The SOFTWARE PRODUCT may not be installed, accessed,

displayed, run, shared or used concurrently on or from different computers, including a

workstation, terminal or other digital electronic device ("Device"). In other words, if You

have several workstations, You will have to acquire a license for each workstation where the

SOFTWARE will be used.

(c)

Backup Copy - You may make back-up copies of the SOFTWARE PRODUCT, but You may

only have one copy per license installed at any given time. You may use the back-up copy

solely for archival purposes. Except as expressly provided in this EULA, You may not

otherwise make copies of the SOFTWARE PRODUCT, including the printed materials

accompanying the SOFTWARE.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS

(a)

Limitations on Reverse Engineering, Decompilation and Disassembly - You may not reverse

engineer, decompile, or disassemble the SOFTWARE PRODUCT, except and only to the

extent that such activity is expressly permitted by applicable law notwithstanding this

limitation. You may not make any changes or modifications to the Software, without the

written permission of an officer of DSC. You may not remove any proprietary notices, marks

or labels from the Software Product. You shall institute reasonable measures to ensure

compliance with the terms and conditions of this EULA.

(b)

Separation of Components - The SOFTWARE PRODUCT is licensed as a single product. Its

component parts may not be separated for use on more than one HARDWARE unit.

(c)

Single INTEGRATED PRODUCT - If You acquired this SOFTWARE with HARDWARE, then the

SOFTWARE PRODUCT is licensed with the HARDWARE as a single integrated product. In

this case, the SOFTWARE PRODUCT may only be used with the HARDWARE as set forth in

this EULA.

(d)

Rental - You may not rent, lease or lend the SOFTWARE PRODUCT. You may not make it

available to others or post it on a server or web site.

(e)

Software Product Transfer - You may transfer all of Your rights under this EULA only as part

of a permanent sale or transfer of the HARDWARE, provided You retain no copies, You

transfer all of the SOFTWARE PRODUCT (including all component parts, the media and

printed materials, any upgrades and this EULA), and provided the recipient agrees to the

terms of this EULA. If the SOFTWARE PRODUCT is an upgrade, any transfer must also

include all prior versions of the SOFTWARE PRODUCT.

(f)

Termination - Without prejudice to any other rights, DSC may terminate this EULA

if You fail to comply with the terms and conditions of this EULA. In such event, You

must destroy all copies of the SOFTWARE PRODUCT and all of its component

parts.

(g) Trademarks - This EULA does not grant You any rights in connection with any

trademarks or service marks of DSC or its suppliers.

3. COPYRIGHT - All title and intellectual property rights in and to the SOFTWARE

PRODUCT (including but not limited to any images, photographs, and text incorporated

into the SOFTWARE PRODUCT), the accompanying printed materials, and any copies of

the SOFTWARE PRODUCT, are owned by DSC or its suppliers. You may not copy the

printed materials accompanying the SOFTWARE PRODUCT. All title and intellectual

property rights in and to the content which may be accessed through use of the

SOFTWARE PRODUCT are the property of the respective content owner and may be

protected by applicable copyright or other intellectual property laws and treaties. This

EULA grants You no rights to use such content. All rights not expressly granted under

this EULA are reserved by DSC and its suppliers.

4. EXPORT RESTRICTIONS - You agree that You will not export or re-export the

SOFTWARE PRODUCT to any country, person, or entity subject to Canadian export

restrictions.

5. CHOICE OF LAW - This Software License Agreement is governed by the laws of

the Province of Ontario, Canada.

6. ARBITRATION - All disputes arising in connection with this Agreement shall be

determined by final and binding arbitration in accordance with the Arbitration Act, and

the parties agree to be bound by the arbitrator's decision. The place of arbitration shall

be Toronto, Canada, and the language of the arbitration shall be English.

7. LIMITED WARRANTY

(a) NO WARRANTY - DSC PROVIDES THE SOFTWARE "AS IS" WITHOUT WARRANTY. DSC

DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR

THAT OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE.

(b) CHANGES IN OPERATING ENVIRONMENT - DSC shall not be responsible for

problems caused by changes in the operating characteristics of the HARDWARE,

or for problems in the interaction of the SOFTWARE PRODUCT with non-DSC-

SOFTWARE or HARDWARE PRODUCTS.

EVENT, IF ANY STATUTE IMPLIES WARRANTIES OR CONDITIONS NOT STATED IN

THIS LICENSE AGREEMENT, DSC'S ENTIRE LIABILITY UNDER ANY PROVISION

OF THIS LICENSE AGREEMENT SHALL BE LIMITED TO THE GREATER OF THE

AMOUNT ACTUALLY PAID BY YOU TO LICENSE THE SOFTWARE PRODUCT AND

FIVE CANADIAN DOLLARS (CAD$5.00). BECAUSE SOME JURISDICTIONS DO

NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR

CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT

APPLY TO YOU.

(d) DISCLAIMER OF WARRANTIES - THIS WARRANTY CONTAINS THE ENTIRE

WARRANTY AND SHALL BE IN LIEU OF ANY AND ALL OTHER WARRANTIES,

WHETHER EXPRESSED OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) AND OF ALL

OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF DSC. DSC MAKES NO

OTHER WARRANTIES. DSC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER

PERSON PURPORTING TO ACT ON ITS BEHALF TO MODIFY OR TO CHANGE THIS

WARRANTY, NOR TO ASSUME FOR IT ANY OTHER WARRANTY OR LIABILITY

CONCERNING THIS SOFTWARE PRODUCT.

(e) EXCLUSIVE REMEDY AND LIMITATION OF WARRANTY - UNDER NO CIRCUMSTANCES

SHALL DSC BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT

DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE,

STRICT LIABILITY, OR ANY OTHER LEGAL THEORY. SUCH DAMAGES INCLUDE, BUT ARE

NOT LIMITED TO, LOSS OF PROFITS, LOSS OF THE SOFTWARE PRODUCT OR ANY

ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTE OR REPLACEMENT

EQUIPMENT, FACILITIES OR SERVICES, DOWN TIME, PURCHASERS TIME, THE CLAIMS

OF THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY.

WARNING: DSC recommends that the entire system be completely tested on a

regular basis. However, despite frequent testing, and due to, but not limited to,

criminal tampering or electrical disruption, it is possible for this SOFTWARE

PRODUCT to fail to perform as expected.

Printed in Canada