- ページ 2

セキュリティシステム DSC PTD1610-SCWのPDF 取付説明書および取扱説明書をオンラインで閲覧またはダウンロードできます。DSC PTD1610-SCW 2 ページ。

ページを印刷する

2. If a knockout (tab) is removed during the installation, it is the installer's responsibility to ensure

that the same degree of protection for the cabinet is provided by the use of bushings, fittings,

etc.

3. The enclosure must be secured to the building structure before operation.

4. The equipment is intended to be installed by SERVICE PERSONS ONLY or equivalent (i.e.,

persons having appropriate technical training and the experience necessary to be aware of

hazards to which they may be exposed to in performing that task and of the measures to

minimize the risks to themselves and other persons.).

5. Internal wiring must be routed in a manner

that prevents:

• excessive strain on wire and on terminal

connections;

• loosening of terminal connections;

• damage of conductor insulation.

6. The power supply must be

PERMANENTLY CONNECTED.

7. The transformer box must be mounted ver-

tically on a wall made from non-combusti-

ble materials only (see Diagram 3).

8. If the mains supply remains below 215Vac

for an extended period of time the

SCW9045/47 battery will not charge.

Limited Warranty

Digital Security Controls. warrants that for a period of twelve months from the date of purchase, the product shall be free of

defects in materials and workmanship under normal use and that in fulfilment of any breach of such warranty, Digital Security

Controls shall, at its option, repair or replace the defective equipment upon return of the equipment to its factory. This warranty

applies only to defects in parts and workmanship and not to damage incurred in shipping or handling, or damage due to causes

beyond the control of Digital Security Controls such as lightning, excessive voltage, mechanical shock, water damage, or

damage arising out of abuse, alteration or improper application of the equipment.

The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and all other warranties, whether

expressed or implied and of all other obligations or liabilities on the part of Digital Security Controls. This warranty contains

the entire warranty. Digital Security Controls neither assumes responsibility for, nor authorizes any other person purporting to

act on its behalf to modify or to change this warranty, nor to assume for it any other warranty or liability concerning this product.

In no event shall Digital Security Controls be liable for any direct or indirect or consequential damages, loss of anticipated

profits, loss of time or any other losses incurred by the buyer in connection with the purchase, installation or operation or failure

of this product.

WARNING: Digital Security Controls recommends that the entire system be completely tested on a regular basis.

However, despite frequent testing, and due to, but not limited to, criminal tampering or electrical disruption, it is

possible for this product to fail to perform as expected.

Toronto, Canada • www.dsc.com

Technical Support 1-800-387-3630 (Can/US), 905-760-3036 (Intl)

Printed in China

Diagram 3

Wall (Non-Combustible Material)

Fuse Block

10VA Transformer

29034694R001

Plastic

Cover