- ページ 8

セキュリティシステム DSC tyco WP8360のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DSC tyco WP8360 19 ページ。

ページを印刷する

Operating the alarm system through SMS

The WP8360 system can respond to SMS commands from any cellular telephone.

The various SMS commands are detailed in the following table.

In this table, <code> means a 4-digit user code and _ means blank space.

Table 4: SMS command list

Command

ARM AWAY

ARM AWAY INSTANT

ARM AWAY LATCHKEY

ARM AWAY LATCHKEY INSTANT

ARM HOME

ARM HOME INSTANT

DISARM

DEFINE HOUSE IDENTITY¹

GET SYSTEM STATUS

TURN PGM ON

TURN PGM OFF

¹House ID includes up to 16 characters, for example, JOHN'S HOUSE

Note: There may be some delay in executing the commands sent through SMS messages if the

WP8360 panel is communicating at the same time.

Periodic testing

The components of the security system are designed to be maintenance-free as much as possible.

It is mandatory to test the system at least once a week, and after an alarm event, to verify that all

system sirens, detectors, keyfobs, keypads, and other peripherals function properly. Proceed as

described in this section and if there is any problem, notify your installer at once.

The test is performed in four parts as follows:

Siren test: Each siren of the system is automatically activated for 3 seconds (outdoor sirens

with low volume). In addition, the system tests the siren of enrolled smoke sensors.

Temp/light test: For devices with temperature sensing, the panel displays the temperature of

each zone in Celsius or Fahrenheit. For devices that have both temperature and light sensing,

the panel displays the temperature and light intensity of each zone.

WP8360 V20.2 User Guide

SMS format

AWAY_<code> or AW_<code>

AWAY INST_<code> or

AWI_<code>

LATCHKEY_<code> or

LK_<code>

LATCHKEY INST_<code> or

LKI_<code>

HOME_<code> or HM_<code>

HOME INST_<code> or

HMI_<code>

DISARM_<code> or DA_<code>

HOUSE NAME_<code> <house

ID> or HN_<code> <house ID>

STATUS_<code> or ST_<code>

PGM_XX_ON_<code>

PGM_XX_OFF_<code>

SMS format for partitions

P# AWAY_<code> or

P# AW_<code>

P# AWAY INST_ <code> or

P# AWI <code>

P# LATCHKEY_<code> or

P# LK_<code>

P# LATCHKEY INST_<code> or

P# LKI_<code>

P# HOME_<code> or

P# HM_<code>

P# HOME INST_<code> or

P# HMI_<code>

P# DISARM_<code> or

P# DA_<code>

P# HOUSE NAME_<code>

<house ID> or

P# HN_<code> <house ID>

P# STATUS_<code> or

P# ST_<code>

P# PGM_XX_ON_<code>

P# PGM_XX_OFF_<code>