- ページ 10
照明器具 Anslut 007343のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Anslut 007343 12 ページ。 Led bathroom light
ページを印刷する
EN
SAFETY INSTRUCTIONS
•
Electrical connections and other electrical
work must only be carried out by an
authorised electrician in accordance with
local regulations.
•
Do not connect a dimmer – risk of material
damage.
•
The product contains integrated LED
bulbs. The light source cannot be
replaced. If the light source fails, the
entire product must be replaced.
•
Never modify the product in any way. The
manufacturer cannot accept liability for
personal injury and/or material damage
resulting from improper use.
•
The product must only be used for its
intended purpose and in accordance with
these instructions. All other use is to be
considered as incorrect and can result in
the risk of fire, electric shock, personal
injury and/or material damage.
•
Keep flammable materials away from the
product.
•
Do not use the product in explosive
environments, for example in the vicinity of
flammable liquids, gas or dust.
•
Do not expose the product to rain,
moisture, impurities or heat.
•
Only use the supplied accessories,
otherwise the warranty will be invalidated.
•
Repairs may only be carried out by
qualified personnel using identical spare
parts.
•
Electrical connections and other electrical
work must only be carried out by an
authorised electrician in accordance with
local regulations.
10
IMPORTANT:
•
Disconnect the power supply
immediately if the product is damaged
or exposed to water.
•
Make sure the power supply cannot be
reconnected unintentionally.
•
Do not cover the product with heat
insulating material.
•
Keep the product out of the reach of
children.
•
Keep the packaging material out of the
reach of children and pets – risk of
suffocation.
•
Disconnect the power supply by
removing the fuse or switching off the
main switch before installation – risk of
electric shock.
•
Check with a voltmeter that the circuit is
without voltage.
•
The product is only intended for
permanent connection.
ELECTRICAL SAFETY
New installations and extensions to existing
systems should always be carried out by
an authorised electrician. If you have the
necessary experience and knowledge
(otherwise contact an electrician), you can
replace power switches and wall sockets,
fit plugs, extension cords and light sockets.
Incorrect installation can result in fatal injury
and the risk of fire.