- ページ 7

セキュリティセンサー DSC LC-171のPDF 取付説明書＆ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DSC LC-171 16 ページ。 Dual-tech motion sensor (dual pir & microwave) with pet immunity

Detector Installation

Important! Prior to installation, read both "Operation" and "Selecting the mounting

location" sections carefully.

1. Install the detector in such manner that the intruder

is most likely to cross the detection area from side to

side.

3. Make sure to attach the metal bracket to a leveled

straight and firm wall, leaving 15cm (5.9 inches) from

the top and 15cm from both sides, for easy installation

and maintenance.

5. Open the detector unwinding the bottom screw.

7. Release the detector body from the metal bracket

by pulling the detector out and up.

2. The detector is to be installed at height of 0.8 to 1.5

meter (2.6 to 4.9 ft.), ideally 1.2m (4 ft.)

4. Rotating the detection beam may be required for

guarding a side window opening while the detector is

installed facing another direction.

6. Release the rear metal bracket by unwinding

internal bottom screw.

8. Attach the rear bracket to the wall or a pole using

mounting screws or metal bands.