TR8200 Thermostat User Manual

LCD Symbols

Symbols

Description

Turning on/off the thermostat

The buttons are locked

Heating is turned on

Frost protection activated

RT

Room temperature

FT

Floor temperature

AUTO

Automatic mode, executes the programmed schedules

Temporary temperature override

O / RIDE

Err

The sensor is not being read by the thermostat

To enter into menu settings,

touch

Then you will see menu 01. Touch

Features description

Menu #

01

Model selection

02

Switching differential

03

Calibrate the room temperature To compensate for any difference between the displayed room temperature and a thermometer

04

Calibrate the floor temperature

05

Maximum floor temperature

06

Backlight turning-on time

07

Temperature format

08

Clock format

09

Frost protection

10

5+2 /7 Day program mode

11

Key click sound

Software version

12

Hidden menu

13 , 14

Setting the clock and day of the week

This thermostat is fitted with a real time clock. It is essential that the clock time and day are set accurately if you require your programmed events to start on time. Follow below steps,

1) Touch time display .

Use

or

2) Touch day display .

Use

or

Select the required operating mode

Auto - Automatic mode, the thermostat executes the preprogrammed schedules. To adjust these schedules, see page 2 the program section.

In addition to Automatic mode, this thermostat has 3 extra manual modes, i.e

- Comfort temperature mode, the highest temperature you want to achieve, this is the temperature that will be required when the room is in use. Default is 22 °C.

- Economy temperature mode, the lowest temperature, the temperature you want to go no lower than when the room is not in use. Default is 16 °C.

- Vacation temperature mode, this is set to stop your floor from going below the set temperature. Default is 10 °C.

To change the set temperatures, touch temperature display. Use

to turn thermostat off, and now touch

Next

or

Previous

to select the menu number. Use

Features Explanation

This thermostat is a combination model allowing you to choose among 3 models.

A model:

air only , with built in sensor

AF model:

air & floor, with both built in and remote sensor

F model:

floor only

, with remote sensor

The numbers of degree difference before switching. The default is 1°C which means

the thermostat will switch the heating on 0.5°C below the set temperature and will

turn it off 0.5°C above the set temperature.With a 2°C differential, the heating will

switch on 1°C below the set temperature and switch off 1°C above the set temperature.

To compensate for any difference between the displayed floor temperature and a thermometer

This is to protect the floor surface by limit the floor temp.

To set the backlight turning-on time when the screen is pressed.

This allows users to select between °C or °F.

12 Hour or 24 Hour clock format selection

This is to avoid room temperature goes below 5°C

This allows you to program either 5 days at once, then the 2 days of the weekend

separately, or a full 7 days at the same time or 7 days separately

Choose whether or not a key click sound is audible when you press the LCD screen

This is to view the current software version

press and hold"OFF"for 5 seconds in standby mode, and you can set the min. and max. room temperature

to change the time. Press and hold

to change the day. Touch

Done

See overl1eaf for further setting up information

Symbols

Description

Day of the week.

Day

Program 1,2,3,4

The program number

Reminding the user to connect the floor sensor (AF and F model only)

Comfort temperature mode

Economy temperature mode

Vacation temperature mode

Touch to view floor temperature for 5 seconds (AF model only)

Touch to start programming of your thermostat

Set

Schedule

Touch to switch among Auto

Heating

Mode

Set Menu

or

adjust the settings. Touch

( AF model only)

or

to change the time faster. Touch

to store and exit.

, each of these manual modes maintains a constant set temperature set by the user.

or

to adjust to the required temperature. Touch

Day 1= Monday, Day 2= Tuesday... etc.

Done

to accept and store.

Touch

or

A, AF, F

1 °C, 2 °C, ...10°C, 1°C by default

0 °C by default, -5°C ~ +5°C

0 °C by default, -5°C ~ +5°C

40 °C by default, setting range 20°C ~ 40°C

10, 20,30,40,50,60 seconds. 30 seconds by default

C / F

24H / 12H

24 hour clock by default

ON = activated; OFF = deactivated

5 2 = 5+2 day programmable

7 = 7 day programmable (by default)

ON = sound audible; OFF = sound off

For review only

to store and exit.

Done

to store and exit.

Done

Edited with the trial version of

Foxit Advanced PDF Editor

To remove this notice, visit:

www.foxitsoftware.com/shopping

to adjust