ページを印刷する[GB]
OPERATING INSTRUCTIONS
1. Main LED
2. Auxiliary LED
3. Sensor
4. Functions button
5. Sensor button
6. Battery compartment
TECHNICAL DATA:
Article no.:
Illuminant:
Batteries:
Luminous flux:
Battery life:
Light range:
Protection type:
Protection class:
Storage temperature:
Operating temperature:
Weight of light incl. batteries:
Dimensions of light:
OBSERVE SAFETY INSTRUCTIONS!
Avoid eye injuries - Never look directly into the beam of light or shine it into other
people's faces. If this occurs for too long, the blue light portion of the beam can
cause retinal damage. If the light beam shines into the eyes, close the eyes and
turn the head away from the light beam.
This lamp exceeds the conditions for risk-free use. The risk when using it depends
on how the user handles the lamp.
(1) This value indicates the factor by which the risk group limit value to the next
lowest group has been exceeded. The limit value is 1.
(2) Distance from eyes to the lamp at which the respective risk group is applicable.
RISK GROUP 2
NOTE: Hazardous optical radiation may be omitted by this
product. When operating, do not look into the lamp for an
extended period of time. Can be hazardous to the eyes.
Gefahrenwert der Exposition / Exposure Hazard Value (EHV)(1): 37
Risk group
Gefährdungsabstand / Hazard Distance (HD)(2)
2
0m – 1,22m
1
1,22m – 12,20m
Free group
> 12,20m
§ Read the operating instructions carefully before first use and then store them
safely.
§ Keep the product and the packaging away from children. This product is not
a toy.
§ This product is not to be used by persons (including children) who have res-
tricted physical, sensory or mental capabilities or who do not have adequate
experience and knowledge in handling this product. Such persons must be ins-
tructed beforehand by a supervisory person who is responsible for their safety
or must be supervised during the use of the product!
§ All illuminated objects must be at least 5cm away from the light!
§ The LED cover must be kept clean.
§ Use the lamp only for its proper intended use.
§ Do not use the lamp in potentially explosive areas or in the rain and do not
expose it to excessive heat.
§ Never submerge the lamp in water or other liquids.
BUTTON 1: LIGHT FUNCTIONS
1. Mode 1: High
2. Mode 2: Low
3. Auxiliary LED
4. Off
BUTTON 2: SENSOR FUNCTION
> Sensor mode ON|OFF
In sensor mode, the desired light function can be selected with button 1.
Then the LED can be switched on and off with gesture control (distance ca. 10cm).
If the sensor function is switched off, the last lighting function used is saved.
1600-0199
Main LED 5W | Auxiliary LED 5mm white
3 x AAA alkaline batteries LR03
Mode 1: 190lm | Mode 2: 60lm |
Auxiliary LED: 4lm
Mode 1: ca. 5,5h | Mode 2: ca. 17.5h |
Auxiliary LED: 30h
Up to 75m
IP54
III
-10C° to 50°C
-10C° to 25°C
86g
59.7 x 45.5 x 38mm
[GB]
CHANGING THE BATTERIES
Make sure to switch the lamp off before changing the batteries. Remove the old
batteries. Always change all of the batteries at the same time.
ATTENTION! Take care to observe the polarity markings (+/-) in the battery com-
partment. Otherwise, there may be a risk that the batteries could become da-
maged and explode. Ensure that you do not short-circuit the contacts. Keep the
contacts away from any metal or damp objects when changing the batteries. Then
close the battery compartment again. Never attempt to recharge non-recharge-
able batteries. Never use new batteries and used batteries together. Use only
high-quality batteries of the same type.
The use of rechargeable batteries and high-current batteries is not permitted due
to other electrical characteristics. In the event that this light will not be used for
an extended period of time, ensure that the batteries are removed to avoid dama-
ge. Empty batteries must be removed.
PROPER INTENDED USE:
§ The head light is intended for mobile use.
§ The head light is not intended for any other applications.
§ Not suitable for household room lighting.
§ Suitable for extreme physical conditions.
ENVIRONMENTAL INFORMATION | DISPOSAL
The product should not be discarded in the normal household waste under any
circumstances. Dispose of the product via an authorised disposal centre or your
municipal waste disposal facility. Observe the current applicable regulations.
Contact your waste disposal facility in the event of any doubt. Dispose of all
packaging materials via an environmentally friendly disposal facility. Used bat-
teries and rechargeable batteries are special waste and must be disposed of in
accordance with national regulations and not with the normal household waste.
LIABILITY DISCLAIMER
The information contained within these operating instructions can be changed
without prior notification. ANSMANN accepts no liability for direct, indirect, inci-
dental or other damage or consequential damage arising though improper hand-
ling or through disregard of the information contained within these operating
instructions. We accept no liability or warranty claims or guarantee claims in the
event of incorrect use of the light.
GUARANTEE INFORMATION
The product has a three year guarantee. The guarantee does not apply to damage
to the device arising through a failure to comply with the operating instructions.
Subject to technical changes. We assume no liability for printing errors.
04/2018
LEGEND
Class 2 equipment
Class 3 equipment
Indoor use only
Conforms to the European directive
Do not look into the lamp
Waste of Electrical and Electronic Equipment (WEEE-Guideline)
Batteries are not normal household waste (special waste)!
Read the operating instructions carefully before use!
Minimum distance from lighted objects to the lamp
0.1m
VI
Energy efficiency level 6