- ページ 7

自動車アクセサリー ATS Diesel Performance Aurora Plus - 5000のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。ATS Diesel Performance Aurora Plus - 5000 18 ページ。 Aurora plus - 5000 turbo kit (2003-2007) 5.9l dodge

ページを印刷する

7. Remove the two 10mm studs using a set of vise-grip pliers.

8. Drill out the two threaded holes using a 7/16" drill bit. Remove all burrs

after drilling.

9. The factory Wastegate hole measures .710" on the HX35 (03-04 trucks)

turbine housing and .840" on the HY35 (04.5-07 Trucks). To maintain

safe drive pressures (exhaust manifold pressure) this hole must be bored

out to 1". Use a die grinder with the carbide burr to enlarge this hole.

Keep the hole as round and centered as possible. Drilling or milling the

hole will provide the best finish, but a die grinder will work.