- ページ 3

タッチターミナル 3nStar PTE0120のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。3nStar PTE0120 16 ページ。 Point of sale system j6412

Safety Precautions

1. Select a flat and vibration-free table to place the terminal

2. The location of the terminal should be chosen to avoid direct sunlight, and exposure to

water and dust

3. Please keep terminal away from strong electromagnetic fields.

4. To prevent fire or electric shock, please avoid blocking or covering air vents from

terminal.

5. In areas of poor power quality or storage, this terminal should be equipped with a

separate power supply to power it.

6. The product uses a standard wall outlet with earthling poles and cannot be arbitrarily

changed. Confirm if the voltage nameplates of the drives match.

7. Make sure the ground prong of the power plug is in a power outlet or power strip

grounding jack, and make sure that the grounding jack is thoroughly grounded. If poorly

grounded or ungrounded, the result will be either an electric shock, a fire, or damage to

the equipment.

8. The terminal is best to not start with other high-power appliances that frequently share

the same socket outlet. The terminal should be located away from the cash register, in a

close accessible way to swap.

9. This equipment should be connected to a variety of cables in case of power failure to

ensure that the conduct takes the screws tighten well to be able to plug or unplug the

cables.

10. Clean the terminal, please do not use a wet rag to wipe the body or chemicals such as:

gasoline, thinners, etc.

11. When the terminal fails, immediately cut off power. Do not attempt to open or repair

terminal, as well as to not let it be promptly used by others.

WARNING: For the non-compliance with the above issues, as well as non-qualified service

personnel or the use of non-designated by the Company to provide and repair parts for

maintenance of all the consequences, the Company does not assume any responsibility.

PTE0120 User Manual

- 1 -