- ページ 5
ステレオ・イコライザー DSPeaker Anti-Mode 8033 cinemaのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DSPeaker Anti-Mode 8033 cinema 20 ページ。 Automatic subwoofer equalizer
DSPeaker Anti-Mode 8033 cinema にも： ユーザーマニュアル (12 ページ)
ページを印刷する
1.2. Back Panel
Anti-Mode 8033 cinema
1. 9 VAC / 12 VDC connector: Input power.
2. LINE OUT / RCA connector: To subwoofer.
3. LINE IN / RCA connector: LFE (Low-Frequency-Effects) or SUB (subwoofer) signal
from the pre-amplifier or AVR (Audio/Video Receiver).
Anti-Mode 8033S-II
1. 9 VAC / 12 VDC connector: Input power.
2. OUT 180° connector: Inverted-phase RCA out.
3. OUT 0° connector: In-phase RCA out (to subwoofer, default)
A balanced XLR output can be created by combining the signals from the OUT 0°
•
and OUT 180° connectors.
4. LEFT LINE IN / RCA connector: LFE or SUB signal from the pre-amplifier or AVR.
5. RIGHT LINE IN / RCA connector: LFE or SUB signal from the pre-amplifier or AVR.
The dual LEFT / RIGHT inputs can be used to connect stereo systems that have only stereo pre-
amplifier outputs instead of a single LFE output.
You can also connect your home theater LFE output to the LEFT input and stereo system to the
RIGHT input using an optional stereo to mono summing cable.
Both Anti-Mode 8033 models can also be connected to speaker-level outputs using a power
reduction device or a suitable resistor divider cable.
Rev. 2.0
1
2
Anti-Mode 8033 cinema Back Panel
1
2
3
Anti-Mode 8033S-II Back Panel
18.06.2012
A
-M
8033
NTI
ODE
3
5
4
/ 8033S-II
CINEMA
Page 5 (20)